Experimental triple chamber Abc box for re xxx 15

 

Gold Member
Username: Insearchofbass

Post Number: 2354
Registered: Jun-04
As posted this is an experimental box and i give no guaruntees on how it sounds or wether it will have port whistle

(Triple chamber abc box)

2.50 28 hz larger chamber 14.275 port length using 4 inch pvc.52 port volocity at 1200 rms
1.25 39.88 hz medium chamber 14.275 port length using 4 inch pvc .37 port volocity at 1200 rms
.625 55.61 hz small chamber 14.275 port length using 4 inch pvc .26 port volocity at 1200 rms

displacements for sub and ports will need to be accounted for also
 

Gold Member
Username: Insearchofbass

Post Number: 2357
Registered: Jun-04
one port per chamber externally and one port joining chamber 1 and 2 and then one port joining 2 and 3 on the farther side
 

Gold Member
Username: Insearchofbass

Post Number: 2358
Registered: Jun-04
internally joining the chambers
 

Gold Member
Username: Subfanatic

Walton, Ky

Post Number: 3915
Registered: Dec-04
sean i drew up a drawing of it to put on here, after work ill make somsone make it smaller so i can post it on here to clear things up
 

Gold Member
Username: Insearchofbass

Post Number: 2369
Registered: Jun-04
ok thanks man i appreciate that and it will help people alot
 

Gold Member
Username: Subfanatic

Walton, Ky

Post Number: 3917
Registered: Dec-04
no problem man, i really like helpin ya out
 

Gold Member
Username: Insearchofbass

Post Number: 2371
Registered: Jun-04
ok hold off one more time i got the port volocity prob figured out another change...lemme convert my findings
 

somethingredicolousihavetomakeup
Unregistered guest
could you design an abc box for a w6-v2
 

Gold Member
Username: Insearchofbass

Post Number: 2377
Registered: Jun-04

4.375 cf. for re 15 triple x



(Triple chamber abc box)
2.50 28 hz larger chamber port volocity .15 at 54.989. port length 1200 rms
1.25 39.88 hz medium chamber port volocity .10 at 54.989. port length 1200 rms
.625 55.61 hz small chamber port volocity .08 at 54.989. port length 1200 rms

displacements for sub and ports will need to be accounted for also

54.989. port length


ports are 12 high by wide 3.784 one per chamber plus one internally joining chamber 1 and 2 and one internally joining chamber 3 and 4

displacements for sub and ports must be accounted for

this one is correct for port volocity guys
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us