So whats up with Wiring

 

Bronze Member
Username: Thumper

Richmond, VA U.S.A

Post Number: 50
Registered: Apr-05
im starting to get a little worried about this whole wiring issue. In order to tell how many amps your amp is putting out, you just look at the fuse/s and add them together. So if it equals about 320 amps, what size wire would i need. Would 0 gauge do me fine if its less than 15'. Im not sure how long my wire needs to be, but i know its under 15'
 

Bronze Member
Username: Thumper

Richmond, VA U.S.A

Post Number: 52
Registered: Apr-05
The power wire will run to a distribution block. I was thinking 0 to 4 but i might go for 0 to 2. what do you think
 

Bronze Member
Username: Thumper

Richmond, VA U.S.A

Post Number: 53
Registered: Apr-05
gotta go to work, ill be back on tonight.
 

Bronze Member
Username: Loc_out

Post Number: 88
Registered: Feb-05
what about 0 and 4...
 

Bronze Member
Username: Thumper

Richmond, VA U.S.A

Post Number: 55
Registered: Apr-05
From the battery 1) 0 ga input--To the amp 2) 4 ga output
OR
1) 0ga input--2) 2ga output
 

Bronze Member
Username: Thumper

Richmond, VA U.S.A

Post Number: 56
Registered: Apr-05
......for the distribution blocks
 

Bronze Member
Username: Loc_out

Post Number: 92
Registered: Feb-05
I like this setup 0 ga input--To the amp 2) 4 ga output
 

Silver Member
Username: Goon

Post Number: 148
Registered: Feb-05
um...is a distribution block nessacary? or only in certain cases?

goon
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us