|
Unregistered guest | hi my name is shawn ballinger i have 2 w3v2 15" subwoffers and a 1000/1 mon block JL AUDIO. i would like to buy a 3rd sub. i dont know the watts or oms of the 2. but i have been told that if i buy the 3rd sub (some as the others W3V2 15)would drain or blow the amp. because of the oms or something what should i do? thug_ak47_9@hotmail.com |
|
Silver Member Username: AraknidBOCA , FL U.S. Post Number: 424 Registered: Nov-04 | I dont think you should cuz its not gonna be that much louder and it might blow your amp. |
|
Anonymous | no |
|
Silver Member Username: AraknidBOCA , FL U.S. Post Number: 425 Registered: Nov-04 | im not sure how you would wire it. |
|
Unregistered guest | through a mon block |
|
Silver Member Username: TheelfkeeperStockbridge, GA USA Post Number: 292 Registered: Feb-05 | you could hook 3 to the 1000/1, depends on whether you have dual 2 or 4 ohm subs. if they are dual 2, wire each sub's VC in series, then each sub in paralel for a 1.33 ohm load. it should work even though the amp says 1.5-4ohm. a friend has 3 4 ohm svc subs wired to 1.33 ohms on a 500/1 and has no problems. or if the subs are dual 4, wire each vc in series, then the subs in parallel for a 2.66 ohm load. i'd think just having 2 would be better since they would receive their RMS, adding a 3rd will only give each around 330 watts. i'd stick with 2 or get a bigger amp |
|
Unregistered guest | ok ty's |