I need power wire help for my amp

 

New member
Username: Andy1984

Saint Louis, Missouri USA

Post Number: 2
Registered: Mar-05
I bought an amp kit but it didn't have a power terminal in it and it said that I needed to purchase one and I did. The thing is, is that the power wire has a ring terminal on the end that's supposed to connect to the battery post. The problem is, the ring is to small for my battery post, and if the kit said that I neede a power terminal why would the power cable have a terminal ring on the end of it, which by the way doesn't fit the power terminal or the battery post. Should I remove the ring and just slide the wire inside the power terminal, or what? someone who knows their stuff please help me.
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 3537
Registered: May-04
You can either cut the ring, strip the wire and use the power terminal, or drill out the terminal ring where it will fit the current battery terminal. Whichever will give you best results, doesn't really matter as long as the wire won't slide out.
 

Bronze Member
Username: Abew330

Camarillo, Ca Usa

Post Number: 18
Registered: Mar-05
i would drill out a hole... better connection
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us