Jbl 1200.1

 

Bronze Member
Username: Basketballinu05

Post Number: 19
Registered: Dec-04
would the jbl 1200.1 work good for two of the new dual voice cord 2ohm alpine type rs 12 inches
 

Gold Member
Username: Carguy

Post Number: 1835
Registered: Nov-04
Zach, that amp will work fine with your 2 subs. Wire the VC in parallel on each sub and then in series to get 2ohms total.
 

Silver Member
Username: Tdbdrummer

Post Number: 250
Registered: Feb-05
Isaac, I don't think he has to worry about wiring in series since the amplifier has 2 speaker outputs internally wired in parallel. If you wire each sub for 4 ohms, the ohm load will be 2 ohms anyways. So there is no need for parallel or series wiring.
 

Silver Member
Username: Fishy

Tamarac, FL USA

Post Number: 628
Registered: Sep-04
Please note that when wiring multiple drivers, whether DVC drivers or their SVC brethren, it is recommended that series connections between drivers be avoided at all costs. This does not include series connections made between voice coils on the same driver. For more information, please consult our DVC FAQ section.

From here:

http://www.jlaudio.com/tutorials/wiring/index.html

Wire the voice coils in series.

-Fishy
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us