How far over the rms?

 

Bronze Member
Username: Goon

Post Number: 20
Registered: Feb-05
quick question. I have two infinity kapp perfects 12.1D, with 350w rms, and 1400w max. if I run an Infinty 1210a mono D amp at a 4ohm load, i would run roughly 425w per speaker. Can I run into any problems by doing this? The help is greatly appreciated.

goon
 

Bronze Member
Username: Minime80

Post Number: 25
Registered: Feb-05
How are you planning on getting a 4ohm load with a Dual voice coil?
 

Bronze Member
Username: Minime80

Post Number: 26
Registered: Feb-05
Oh, I see! Wire both the perfects for 2ohms and then put them in series off that one amp right?
 

Bronze Member
Username: Minime80

Post Number: 27
Registered: Feb-05
Or, I guess you could wire the subs for 8ohms and then run them in parallel to the amp... eh, whatever, quit confusing me.
 

Bronze Member
Username: Goon

Post Number: 21
Registered: Feb-05
hehe i'm kinda new at this...but i was told to do it in series....If I'm missing something here please help me out! thanks again.

goon
 

Gold Member
Username: James1115

Wilton, Ct

Post Number: 1469
Registered: Dec-04
yes run them in a series for a 4ohm load I dont think 425 will be a problem for those subs just take it easy on them and tune the rst of your system so that you dont really need to crank your subs at real high volumes.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us