Like

12W7 or 10W7 w/Rockford Fosgate 800.2

 

New member
Username: Tjksail

Post Number: 1
Registered: Feb-05
I have a Rockford FOsgate 800.2 amp, NOT the punch series. The punch certificate states it puts out about 960 rms. My question is, should I go with a 10W7 or a 12W7 with this amp. Would it be too much for the 10...too little for the 12?
Thanks
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 645
Registered: Dec-04
12w7
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 646
Registered: Dec-04
ohhh but I dont believe the punch amps are stable below 4ohms bridged. The w7 puts out a 3ohm load.
 

New member
Username: Suleman36

Post Number: 5
Registered: Feb-05
I have 2 jl 500/1 amps. Should i go with the 12w6v2's sealed which are 400rms each or the 10w7
s which are 500rms each? What yall think
 

New member
Username: Tjksail

Post Number: 3
Registered: Feb-05
so you don't think my amp could run a w7 at all
 

New member
Username: Suleman36

Post Number: 9
Registered: Feb-05
youll kill your amp cause its not 3 ohm stable which is what the w7 requires.
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 648
Registered: Dec-04
I am sure it could but I wouldnt recomend it. Hey Mo I was going to respond to your other post but I will do it here. I would go with the 12w6's with your 500/1's to each of them. I dont think you will get the depth you are looking for with rap in the 10's but the 12's will hit them very nice. You will have better Q out of the w7 but not much. The w6v2 is designed very similiar to the w7 and the price tag difference in my opinion is not worth it.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us