HELP!!! Wiring my amp and subs PLZ!!!!!!!!

 

New member
Username: Fatass_tony

Post Number: 4
Registered: Jan-05
I purchased one 12" Pioneer Premier TS-W2000SPL which is 2000w MAX and 750RMS, and i also got a 600w JBL amp JBL BP600.1 which runs an Output 2 Ohms: 600W x 1, how do i correctly set up this system to get MAX clean bass out of it.
 

New member
Username: Fatass_tony

Post Number: 5
Registered: Jan-05
Ogh and it also Outputs 1 Ohm: 600W x 1, so apperantly its one ohm stable, any way to use that to get more bass out of it, im guessing not since the amp is 600watt maz, just making sure.
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 402
Registered: Dec-04
what is the voice coil configuration on your sub?
 

New member
Username: Fatass_tony

Post Number: 6
Registered: Jan-05

# Double 4-Layer, Long Voice Coil (2 x 4ohm)
# 4-Slit Glass Imide Voice Coil Bobbin
# 1-Piece Rubber Gasket
# 750 Watts RMS/2000 Peak Power
# Dual Voice Coil Design (2ohm or 8ohm)
# Frequency Response: 18 - 2kHz
# Sensitivity: 89dB (1W/1m)
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 427
Registered: Dec-04
well you can run it parellel @ 1ohm but you are underpowering them quite a bit. I would get 1 more JBL bp 600.1 and run them both one to each of the subs.
 

New member
Username: Fatass_tony

Post Number: 7
Registered: Jan-05
You must not have understood me correctly, im only planning to power ONE "12 sub, so i wanted to know if there is a specific efficent way to do it.
 

New member
Username: Fatass_tony

Post Number: 9
Registered: Jan-05
bump
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 440
Registered: Dec-04
ok my bad yes run it in parellel at 2ohms should sound good.
 

Silver Member
Username: Lbeckner

Tulsa, Ok Usa

Post Number: 258
Registered: Oct-04
bump
 

Anonymous
 
Your info is wrong. The JBL BP600.1 puts out 600W @ 2 ohms, so wire your voice coils in parallel for a 2 ohm load.
 

Silver Member
Username: James1115

Wilton, Ct

Post Number: 447
Registered: Dec-04
thats what I said Anon!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us