I building a box

 

Bronze Member
Username: Perrydog

Flint, Michigan USA

Post Number: 12
Registered: Jan-05
im off to build a bow what would be the best type for 2 kenwood kfc 3005 and what direction make them face and cone in or cone out for loudest bass, all suggestions welcoea
 

Bronze Member
Username: Themax96se

USA

Post Number: 30
Registered: Jan-05
Do you already have the arrows for your bow?
 

dummy
Unregistered guest
bow, that's the front of the boat and that last post was rather stern..
 

Bronze Member
Username: Perrydog

Flint, Michigan USA

Post Number: 16
Registered: Jan-05
i have everything its jsut to build the box now
 

Bronze Member
Username: Perrydog

Flint, Michigan USA

Post Number: 25
Registered: Jan-05
umm a box not a boat
 

Silver Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 281
Registered: Nov-04
if this is your first box, iwould just make it a very simple box. probably go 1.25 feet in each chamber. or 2.5 all together. just make it a normal box. then when you get better you can make a fancier box.
 

Silver Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 282
Registered: Nov-04
if your want a ported box go 2cu feet in each chamber. try to find some designs for your box, and look at your spec sheet and try to build according to it.
 

Silver Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 283
Registered: Nov-04
if you want load bass then a vented box(bow)lol is what you need.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us