2 ch amp Question

 

Silver Member
Username: Johnnylemoine

LaPlace, Louisiana United States

Post Number: 307
Registered: Aug-04
Are there any 2 ch. amps that are 2 ohm stable in bridged mode? I have my amp bridged but i have my subs VC's run in parallel to give it a 2 ohm load. am i going to ruin my amp? Its been running like this for a year or two now. Ive been looking on ebay at some RF amps and all the 2 ch. say 4 ohm stable in bridged mode.
 

Silver Member
Username: Johnnylemoine

LaPlace, Louisiana United States

Post Number: 308
Registered: Aug-04
bump
 

Silver Member
Username: Oleg

Santa Monica, CA USA

Post Number: 139
Registered: Nov-04
Not sure where you're getting this, but I see that you can bridge them at 2ohms. Look at class D amps though, those are usually even 1ohm stable.
 

Silver Member
Username: Johnnylemoine

LaPlace, Louisiana United States

Post Number: 309
Registered: Aug-04
yeah I figured you could since mine is not ruined, its just that i see the amps specs and they say 4 ohm stable in bridged mode and 2 ohm stable in stereo mode. O well, thanks for the input. im getting a mono block amp but it is a class A/B, dam. I really wanted to get a class D.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 6393
Registered: Dec-03
there are amps that are stable at 2 ohms bridged.
look for amps stable to 1 ohm in stereo.
those will be stable to 2 ohms when bridged.

Orion's HCCA series amplifiers are all this way in fact, as are a number of other brands.
 

Silver Member
Username: Johnnylemoine

LaPlace, Louisiana United States

Post Number: 312
Registered: Aug-04
cool thanks Glass.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us