Like

2x 250W Speakers to Alpine MRV-F310

 

New member
Username: Illusionaryman

Post Number: 4
Registered: Nov-04
i have 2x 250W 4ohms Pioneer Speakers and connected them to Alpine (MRV-F310)(2-CH) 1 Speaker to each channel and the sound seems to be a bit low and i was wondering to know if its ganna increase the output power if i wire both speakers as parallel and connect it to 1-Channel on the amp.
on the amp manual it says:
per channel into 4ohms...........30W(0.04%THD)
per channel into 2ohms...........50W(0.03%THD)
Bridged into 4ohms...............100W(0.03%THD)
here is the manual:
http://www.nrg1.com/Alp_bruksanvisninger/Owners/M/MRV-T301/68P90664W84-B.pdf

the bridge on this amp is 4ohms..can i connect
the speakers on it even though it's not matching the ohms.

thanx for any replys
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5982
Registered: Dec-03
what speakers are these?
what size, and how many ohms are tehy?

that amp is only 30 watts x 2 @ 4 ohms.
if these are subs, that amp is far too small to use well.
bridging an amp doesn't increase power really. all it does is put full power into 4 ohms for a single speaker.
if you have two 4 ohm speakers, or even two 2 ohm speakers, you'll get the same results bridged as you will with one speaker per channel.
 

New member
Username: Illusionaryman

Post Number: 5
Registered: Nov-04
sorry i missed typed the model for the amp..its MRV-T301 but the link for the manual is right

the speakers are pionner 250W 4ohms
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5986
Registered: Dec-03
250 watt 4 ohm what???
4" speakers?
« Previous Thread | Next Thread »

Facebook

Directory

Main Forums

Today's Posts

Forum Help

Follow Us