Glass/Someone knowledgeable: amp for two 10" Alpine Type-R's

 

New member
Username: Datboyp

Odessa, TX USA

Post Number: 7
Registered: Oct-04
would the JBL BP600.1 be adequate for these two subs, or should I go with the JBL BP1200.1?
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5513
Registered: Dec-03
use two 4 ohm type R 10" and the 600.1 is plenty.
that's 300 watts each. they'll do great in the proper box.
 

New member
Username: Datboyp

Odessa, TX USA

Post Number: 8
Registered: Oct-04
ported or sealed? i have a limited amount of room (single cab truck) and don't think i could go ported with two 10"s.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5516
Registered: Dec-03
two ported 10" will take about 3cu ft total.
not that much room really.
 

New member
Username: Datboyp

Odessa, TX USA

Post Number: 9
Registered: Oct-04
and, the box i have designed has about .60 cubic feet of room inside it. the subs are listed as 0.5-0.8. Would this work well?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us