Like

Anyone know what the problem might be?

 

New member
Username: Whatthehell1051

Post Number: 1
Registered: Oct-04
Bought scosche wiring kit. Hooked it up to my Legacy amp - 800watts x2 - and nothing happens. My amp doesn't come on. Check to see if power was getting to the amp and there is power because I used a volt tester and the REM and +12v wire ends that are connected to the amp have power. And still the amp dosent want to come on. Anyone have a clue what might be the problem?
 

Silver Member
Username: Fishy

Tamarac, FL USA

Post Number: 262
Registered: Sep-04
Could be the amp. I asume you've checked the fuses. What did you use as ground when you checked those voltages? If you used the ground terminal at the amp then your ground should be good enough to turn the thing on. Do you happen to remember what the voltage was off the REM lead?

-Fishy
« Previous Thread | Next Thread »

Facebook

Directory

Main Forums

Today's Posts

Forum Help

Follow Us