Please Help!!!!!

 

Anonymous
 
Will a JL 1000/1 be able to push two 12w7? Or should i just get two JL 500/1?
Please Help!!!!
 

Silver Member
Username: Fishy

Tamarac, FL USA

Post Number: 170
Registered: Sep-04
They'd probably sound almost exactly the same with a slight edge to the twin 500/1's. I think they are a little more "underated" and would probably have a little better damping factor running at a higher impedance, but with the JL's switching voltage rails I'm not sure.

Jonathan would know for sure of course.

Has anyone thought "alternator" yet?

-Fishy :P
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 1799
Registered: May-04
Better the single 1000/1 IMO. You'd have to match the gains of the dual 500/1s perfectly for best SQ, which is very hard to do since each amp/sub will be a little different due to tolerances. Damping difference wouldn't really be noticeable, or worth mentioning for that matter. Think of the JL regulated amps more as 1.5 ohm stable amps capable of putting more power into higher impedances instead of amps that don't add power with less impedance. Difference of the amps at different impedances isn't a lot. Plus, the 1000/1 will be cheaper and take up less space, and won't require a distribution block and two ground points.
 

Anonymous
 
Thanks Fishy and Jonathan is there any other amp that will push does sub's.
 

Silver Member
Username: Fishy

Tamarac, FL USA

Post Number: 172
Registered: Sep-04
Jonathan knows.

-Fishy :P
 

Anonymous
 
Jonathan is there any other amp that will push does sub's?
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 1812
Registered: May-04
Yeah, any amp that'll do about 1500W RMS into 1.5 ohms. Depends totally on your budget. JBL 1200.1 would work.
 

Anonymous
 
Jonathan what about a PD3 amp!!!
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 1820
Registered: May-04
Which amps are you talking about there? You're not talking about the Boss PD-3000 amps are you?
 

Anonymous
 
My bad i was talking about a Phd2....
2000 W x 1 into 4 ohms
2000 W x 1 into 2 ohms
1000 W x 1 into 4 ohms
Mono block - single channel amplifier
 

Anonymous
 
OR the EARTHQUAKE PH-D3
~5000 Watts Maximum Power
~3000 Watts x 1 into 1 ohm
~2600 Watts x 1 into 2 ohm
~1300 Watts x 1 into 4 ohm
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us