Is there a way to make jtag port for dp311 and extract the box keys with jkeys

 

New member
Username: Altinem

Post Number: 1
Registered: Aug-04
i was wondering if there is way to make jtag port for dp311 and run dp311 with magic card.
 

Silver Member
Username: Jmill1948

Chester, Va Usa

Post Number: 188
Registered: Apr-04
check the magic card forum
 

New member
Username: No_bser

Post Number: 8
Registered: Aug-04
absolutely not! can't be done
 

New member
Username: Altinem

Post Number: 2
Registered: Aug-04
i found jtag pin number for sti5517 but i cant see the pins on the board because pins stay under the chip.what i am thinking is if we remove the sti5517 and locate the traces for those pins and connect a jtag.is it possible or not?

 

Bronze Member
Username: No_bser

Post Number: 11
Registered: Aug-04
if you have to play with, then yes you can do that, but i would hesitate doing it... still not worth it...

again, it's all about testing.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us