Help with nfusion phoenix suns disconnected

 

Silver Member
Username: Daneegha

Post Number: 200
Registered: Oct-06
screen displays I-on N-on P-off Emul Off Suns disconnected,
Any help please. I tried to reboot stb and router and no luck.
Thanks!
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14271
Registered: Jan-08
barak obama

Do a factory default then rescan your satellites then do a hard reboot with back panel switch.
 

Bronze Member
Username: Orbill

Post Number: 14
Registered: Oct-05
After a factory default, do you have to re install the files
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14272
Registered: Jan-08
Orbill

No!
 

Silver Member
Username: Daneegha

Post Number: 201
Registered: Oct-06
I tried that and nothing happened.
It still displays suns not connected.
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14273
Registered: Jan-08
Barak

Go in menu>System Settings>SW Version then give me the program Version!

Go in menu>User Settings, put the autoroll to "Dish" then the Emulator to "On"!

Power off the Modem, the Router and the receiver then power on in this order: Modem, Router and Receiver( wait 1 minute between each items).
 

Silver Member
Username: Daneegha

Post Number: 202
Registered: Oct-06
Boot: r3x 1.30 software ver: 1.54.2 ipvr 0.77 CDC checked.

I tried emul on and autoroll to dish,
from what I understand when emul is on only with stand alone. But with Iks it must be off, anyway I still no luck.
It shows I-On/n-on/p-on/emul-on/suns disconnected.
Thanks!
 

Silver Member
Username: Daneegha

Post Number: 203
Registered: Oct-06
I tried rebooting, modem, router and stb and still nothing, btw I forgot to mention I have power lines involved, and I tested the network with my laptop and I know is good.
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14274
Registered: Jan-08
Barak

Ok!

Now check it!

Menu>Internet: put those settings!

Network connection> On
Auto Update Check>Off
Network Information: on DHCP/Static, put DHCP
Proxy Connection>Off

Do a hard reboot!

If it not work!

Give me the info on Network information:
IP Adress??
Subnet Mask??
Gateway??
PVR Server IP Adress??
 

Silver Member
Username: Daneegha

Post Number: 204
Registered: Oct-06
I have to go to work, but I will give it a try in 4 more hrs,
Thanks!
 

Silver Member
Username: Daneegha

Post Number: 205
Registered: Oct-06
Hi, I'm back.
I reset to the settings above and now screen shows,
I-off/ N-on/ P-off/ Emul-on/ Suns Connected.
Still no picture.
 

Silver Member
Username: Daneegha

Post Number: 206
Registered: Oct-06
Thanks! Plymouth, it works perfect now after I change the settings and hard reboot it.
You are the Man!!!
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14278
Registered: Jan-08
barak obama

Happy to hear it!

You are welcome!
 

Platinum Member
Username: Nydas

Post Number: 19131
Registered: Jun-06
Plymouth: Please do not join the White House if offered. Quebec and Canada needs you!
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14281
Registered: Jan-08
LOL!
 

New member
Username: Pwilli

Post Number: 1
Registered: Jun-10
}I have a 15 year old 45 inch projection tv it's only been repaired once 6 years ago.repairman says the circuit board has gone bad. how much longer will this set last?
thank you p williams
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14284
Registered: Jan-08
PWilliams
First you posted in bad forum!

The good forum is this one: https://www.ecoustics.com/electronics/forum/home-video/15131.html

From what I know the reliability depends of the brand of your TV, the Sony will not last too much longer than 6 years because the tube are very bad in comparison with a RCA rear projector!

List the brand and model of your TV, it will help us to talk about your problem!
 

Bronze Member
Username: Jayman1

Post Number: 13
Registered: Jun-10
hi
how to load new file on nfusion solaris . please help
 

Bronze Member
Username: Jayman1

Post Number: 14
Registered: Jun-10
how to load new file for nfusion solaris?
thanks
 

Platinum Member
Username: Plymouth

Canada

Post Number: 14364
Registered: Jan-08
jayman1

With null cable(serial port)!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us