Nalin !!! Puff help!!!

 

Silver Member
Username: Adrenalyzer

Post Number: 105
Registered: Jun-06
when i DN LD 209 puff bin, when finished, i get night rider lights, a continuous puff flashing, why, how can i fix, i already have puff LZMA bin 204#, so...... hmmm I have P.S 2500a
 

Platinum Member
Username: Nydas

Post Number: 14529
Registered: Jun-06
Load 1.03 boot AGAIN and then the LZMA_209.
PUFF_LZMA link
 

Platinum Member
Username: Nydas

Post Number: 14530
Registered: Jun-06
Adrenalizer:

THERE WAS NO PUFF_LZMA_204.
It started at 206 or 207
 

Silver Member
Username: Adrenalyzer

Post Number: 106
Registered: Jun-06
i had 207
 

Platinum Member
Username: Nydas

Post Number: 14534
Registered: Jun-06
There was PUFF_207 and PUFF_LZMA_207
Which one did you have?
If it was not LZMA, you have to add Boot 1.03 before installing BIN
 

Bronze Member
Username: Lubfr01

Post Number: 96
Registered: Sep-07
Hi Nalin...

I have Fwank 7 Lzma V207F-emu 'Jwh-Team-Puff' Puff ver 103....
Now I started getting scrambled channel message on my FLU converted to Pansat 2700, where to go from here?

Tnx
Frank
 

Platinum Member
Username: Nydas

Post Number: 14540
Registered: Jun-06
1. Load 1.03 boot AGAIN and then the LZMA_209. Then do user setup and scans.

2. If that does not work, install the original boot b60 using Chancey's special loader, then install 294T Bin, and convert to PUFF and then to PUFF_LZMA, and repeat steps in 1 above.

If you do step 2, you are taking a SLIGHT RISK of getting into a deep sleep - only JTAG would wake the receiver up if that happens.

The main link for revert to b60 and PUFF conversion is:
PUFF link

The link for conversion from PUFF to PUFF_LZMA is:
PUFF_LZMA link

Best of luck.
 

Bronze Member
Username: Lubfr01

Post Number: 97
Registered: Sep-07
As always thanks Nalin [fta bread and butter] Nyda.
 

Bronze Member
Username: Plutoman_sr

Post Number: 11
Registered: Oct-06
deserving comment !
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us