Question for Nalin

 

Bronze Member
Username: Rags

Post Number: 22
Registered: Oct-06
Message for Nalin -

Nalin> I am on the fwank7_Jvvh-PUFF_275 bin since July 3rd - and have not switched on the TV for the last few days.
I dont see a new update on the public.box site - is there something I am missing.

When I updated the software on July 3rd - it was working fine.

Can you please advise.

Thanks bro!
 

Platinum Member
Username: Nydas

Post Number: 11084
Registered: Jun-06
Latest BIN for Pansat 2700, clones and conversion 2500/2700 is version 275
There are several puff versions and one LZMA and 1-2 b75 version for converted receivers.
As far as I can see they are posted at the Box.net site.
Saif and Tronics b75 bins are missing. You can get these at
[link removed]
 

Bronze Member
Username: Rags

Post Number: 23
Registered: Oct-06
here is what happened.

I upgraded to b75 and then went on to puff. On puff i have done baout 4-5 version upgrades and it was working fine.

Even with the latest upgrade to 275, things were fine except the last 3-4 days.

Do you suggest i reinstall the fwank7_Jvvh-PUFF_275 upgrade?

Please advise.
thanks
 

Bronze Member
Username: Thermongod

Post :579

Post Number: 13
Registered: Jul-08
Message for Nalin -

Nalin> I am on the fwank7_Jvvh-PUFF_275 bin since July 3rd - and have not switched on the TV for the last few days.
I dont see a new update on the public.box site - is there something I am missing.

When I updated the software on July 3rd - it was working fine.

Can you please advise.

Thanks bro!
 

Bronze Member
Username: Mcrabbycabby

Wpg, Man Canada

Post Number: 60
Registered: Jun-06
hello i have a 2700 clone i put the 275 v1 tivo bin and i got wierd diseq things with this bin its not the normal 1 i ussally get it has lots of choises which 1 will work best i hope you know what im talking about thank you.
 

Platinum Member
Username: Nydas

Post Number: 11086
Registered: Jun-06
raghuveer yadav: Install another Puff_275 BIN and if it gives problems, it would be best for you to install the b60 BOOT ad 294T BIN and start the process of conversion again.
 

Platinum Member
Username: Nydas

Post Number: 11087
Registered: Jun-06
DisEqC choices are usually 1,2,3, and 4. Your choice depends upon what physical connection you have to the switch. Most installations have 119W on Port 1, 110W on port 2 and some other (such as 61.5 or 148W) on Port 3 or 4.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us