FLU -JTAG-instruciontions


Bronze Member
Username: Snagovac

Post Number: 21
Registered: Nov-06
please help for instructions JTAG .FLU

Silver Member
Username: Dimwitt

Post Number: 498
Registered: Aug-06
1. Open program Skymax from the PC.

2. At Skymax try to press connect button which is about less than one second after you turn the power switch at the back of the receiver until the program can connect to the receiver.---This step may be try and error until you get the right moment to be able to connect to the receiver

3. After connected to the receiver, press Erase button to erase the memory of the bad bin write.

4. Press Write button then select the factory bin (you must have the factory bin or the healthy bin) to reset the receiver back to working again.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us