Need help with Eagle Star Flu converted to 2700

 

Bronze Member
Username: Mriaz

Post Number: 33
Registered: Dec-07
I am trying to san but no signal at all. Downloaded new BIN 248T still 0 Channels found. When I press (SIG) the SKEW is UNLOCK. It should be LOCK, but I don't know how to LOCK to get signal. Please i will appriciate it if some one help me.
Thank you!!
 

Bronze Member
Username: Mriaz

Post Number: 34
Registered: Dec-07
anyone who can help above problem please
 

Gold Member
Username: Nydas

Post Number: 7965
Registered: Jun-06
You need to set up properly.

E. Connection to TV:
1. With receiver switch in off position, connect the Sat antenna, and the cables to TV.
Turn on TV
Turn on receiver.
You will see b75 go across and freeze on '5'.
WAIT
After a little while the TV will come on asking you to confirm Language
English.
Press OK.

2. First do Menu/ default settings (Factory default)
It will ask for PIN '" use 1668 if you have forgotten your PIN, usually a 0000.

3. Next do User setup. The date/time will show as 01/01/2006 12.00 noon. Set time to manual and enter the correct time, date, and time zone.
Make sure summer time is off. Make sure closed caption is turned off.

4. Next do Menu/Dish Setup/Antenna setup
Select your known dishes and use the known DisEqC port connections.
You can connect to ports without knowing which is which using trial and error and the signal strength.

Now do Blind scan (power scan) for each of the selected sats.
You must see both Horizontal and Vertical TPs.

F. Watching TV:
By the time you finish the blind scan, the new keys will have loaded and you are ready to watch TV.
You MUST switch off at the back once and switch on.
You can se up the channels alphabetically or in other ways using Channel Edit and Sort.
You can and should set up P-lock on some P0RNO channels.
You can rename the 5 Favorites using right arrow key.
If a channel does not appear, you can do a separate TP scan.
Also look for it in the list, e.g. channels 614 '" SET may appear in the list as TV 614, and you can rename.

HAPPY VIEWING
If resets occur, try turning autoroll off and Closed Captions off.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us