Cant upload viewsat extreme files???
|
Bronze Member Username: BlueashPost Number: 13 Registered: Jul-07 | I got new files 2day for viewsat extreme but i am unable to upload it to the receiver it just says sending thn again resending but nothng is happening n on d receiver there is just 00.00 or 00.02 dunno whts wrong...plzz help |
|
Silver Member Username: SatgrlPost Number: 930 Registered: Oct-07 | check com port and which loader are u using? make sure its correct..turn the receiver off click PC-->STB then wait for 5 seconds and turn on receiver from back...try it..make sure u got loader2 |
|
Bronze Member Username: BlueashPost Number: 14 Registered: Jul-07 | yes i am using loader2 n com port is also right coz on other port loader is givng error... |
|
Silver Member Username: SatgrlPost Number: 937 Registered: Oct-07 | unzip files as well..which cable are u using |
|
Bronze Member Username: BlueashPost Number: 15 Registered: Jul-07 | Nothng is helping same as before.... |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1956 Registered: Sep-06 | Blue, Please post everting you do step by step to upload... I can help you |
|
Silver Member Username: Bill038Post Number: 256 Registered: Sep-06 | the 00.00 and the 00.02 is the clock running when the unit is in stanby. Turn it on with the remote |
|
Bronze Member Username: BlueashPost Number: 17 Registered: Jul-07 | FTA I am turning off d receiver from back as well as from front thn opening d loader n open file n pc-stb thn after 5sec turning on d receiver just from d back n on d loader status says file is sending thn again resending but nothng is happening on d reciver, after few mins there is 00.01 00.02 on d receiver.... |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1958 Registered: Sep-06 | Loader2 User Guide "Loader2" can download the firmware from PC to STB. 1. Install "Loader2" to your PC. 2. PLUG OUT YOUR STB FROM OUTLET. 3. Connect "NULL MODEM CABLE" between PC and STB. 4. Run "Loader2" on PC. 5. Run the "Tool->Configuration" menu and select serial port what you use. 6. Press "Open File" button and select the file what you want to download. 7. And then press "PC->STB" button. WHEN ZMODEM WINDOW IS APPEARING, PLUG IN YOUR STB or use the switch on the back. 8. Then selected file will download from PC to STB. 9. When download is complete, you can see below message. When you see this dialog on PC, STB will start to write flash memory. Please wait until STB automatically reboot. https://www.ecoustics.com/electronics/forum/home-video/414416.html |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1959 Registered: Sep-06 | Have you rebooted the computer?If not please do so now..then try again Sounds from here that the computer and receiver are not "talking" yet |
|
Silver Member Username: RunnerguyPluto Post Number: 891 Registered: Sep-06 | When you find out your going to feel dumb |
|
Silver Member Username: Leafs_wingpPost Number: 161 Registered: Sep-07 | Unplug all USB ports... especially if you are using a USB to Serial cord. Just leave that cord plugged in, otherwise unplug anything plugged into a USB port. This happens all the time for me when I am helping my buddy with his Extreme. |
|
Bronze Member Username: BlueashPost Number: 18 Registered: Jul-07 | FTA i followed everythng u sed n it worked thankxx a lott last time also u helped me really appreciate ur help....even all members who helped me in this thread thankxx guys.... |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 1961 Registered: Sep-06 | glad it worked out have a good day |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics