STB to STB for Fortec converted to 2700

 

Bronze Member
Username: Vittu

Post Number: 38
Registered: Oct-07
would it be possible to load the new file on FLU converted to 2700 and then do a STB to STB for 5 other FLUs to save time. Instead of doing the setup again and again (Connecting all cables, Sat installation/setup,blind scan, etc) Will it retain the exact settings on all FLUs, Is it possible? Are there any instructions?
 

Silver Member
Username: Dimwitt

Post Number: 237
Registered: Aug-06
If sw transfer is in user setup menu it might work

connect master to tv ,slave to master
 

Gold Member
Username: Crazy_greek

Post Number: 1338
Registered: Jul-06

YES
S/W Transfer from Receiver to Receiver

A) Connect the Master Receiver to the slave Receiver using a RES-232 Female to Female
Nul modem Cable.

B) Select the s/w transfer mode using the volume
keys

C) In the Code Mode, you are transferring the ""main" s/w from the STB (Master)
receiver to the STB (Slave) receiver.
To start the transfer, you must press the "Channel Up" key on the Front panel of STB (Master), not STB (Slave).

D) In the Data Mode, you are transferring the "main" s/w from the STB (Master) receiver to the STB (Slave) receiver. To start the transfer, you must press the "Channel Up" key on the Front panel of STB (Master).

E) Press the Exit key to cancel the transfer.
After transferring the Code file.you should turn OFF, then ON the STB (Slave) receiver.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us