Tooter, thanks for the clue, but i did what you said and still not get the HD channels, on the DNW guide i see the programing and i know what channels are but they are not on my scanned list really strange, do you have one 9200?? i still need your help
I just tried it, and got nothing, makes sense my LNBs doens't work ?? like i said before i had a pansat 2700a it was perfect, so lnbs are not defective i just mention cuz a friend said maybe i need those new ones different ones, i don't know, i'll try the future site you gave me, now they are updating the site, it's not available tks
yes, i did exactly before, the problem is when i choose 12399 or 12457 tps i have no signal evn quality, that's why i can't scan, i went to the antenna LNB to try better specific position, but get no signal and no quality for these tps, getting crazy here.
One more question for you, so if you have 110 and 119 you see DNW programing on PPV movies, with 9200 won't be able to watch those HD channels ?? there are about 7. Do you know anything about?
yes DNW stands for it, so I tried yesterday to change antenna etc... no signal, do you think it maybe the board?? i don't think there is any other cause, specially like you said the LNBs will work for it , but the guy who sold me said it was tested.
yes, the board is recognized, i have seen it , so still a mystery, why i can't see these channels you have, I'm waiting till future-fta site come back, but you gave me pretty much all to do, really upset here.
Installing this kit is a simple procedure that does not take more than 5 minutes:
* Remove the top cover of your Pansat 9200HD receiver with a Phillips screwdriver. * Remove the "Tuner 2 IF Out" cap from the back panel of the receiver. * Make sure you are not carrying any static electricity by touching the chassis of your receiver for 2 seconds. * Remove the tuner board from its anti-static bag. * Install the adapter board to the tuner board and connect all supplied cables to that board. * Tighten the tuner kit to the back panel of the receiver through the "Tuner 2 IF Out" opening. * Connect the power cable to the power supply (CN3 connector). * Connect the data cables to the main circuit board of the 9200HD (CH6 and CH7 connectors). * Make sure the tuner kit is in place and not "slanted". * Connect the RF cable to the tuner board and to the "Tuner 1 IF Out" port on the back of the receiver. * Install the cover on the receiver and tighten all screws. * Turn on receiver. The DVB-S2 / 8PSK option in the Advanced Satellite Scan menu will allow you to scan DVB-S2 / 8PSK transponders containing free-to-air programming.
i also did the factory setting --all data-- after installing board