Chancy bin 221T

 

Gold Member
Username: Asharfi

Post Number: 1383
Registered: Aug-06
finally ... available at www.dssworld.co.nr
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 363
Registered: Mar-07
That brings up an interesting question. There are some "brave" testers who had loaded the original 2700 bin onto their converted 2500>2700 boxes without any adverse effect except for the fact that the remote would not work. How they did not fry their boxes, I'll never understand.

Anyhow, I wonder if some of these brave testers will try this clone-safe version and report back. I wouldn't try it but there are some who would.
 

Gold Member
Username: Asharfi

Post Number: 1385
Registered: Aug-06
i tried it ... looks good ... THANKS A LOT TO CHANCY
 

Gold Member
Username: Dude123

Post Number: 1305
Registered: Jul-06
Congratulations!!!!!cheers!!!!
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 364
Registered: Mar-07
AV what box did you try it on? Your post following mine has now got me properly confused. :-)
 

Gold Member
Username: Asharfi

Post Number: 1386
Registered: Aug-06
OMG ... now the remote control isn`t working after it rebooted ... DONT DOWNLOAD THIS BIN .... WAIT FOR THE BUG FIX .... I M SWITCH BACK TO BIN 220 T and watch locals
 

Silver Member
Username: Satgrl

Post Number: 462
Registered: Oct-07
AV for the pansat 2700A original bin 221 is there and problems with thaT? is everyhting working well? thanks let me know
 

Gold Member
Username: Asharfi

Post Number: 1388
Registered: Aug-06
NO - With this latest bin by Chancysand, your remove will NOT work. Please wait for the update and DO NOT DOWNLOAD THIS BIN at this time ... stay with bin 220T and watch locals
 

Gold Member
Username: Asharfi

Post Number: 1389
Registered: Aug-06
I meant REMOTE ... not remove ..
 

Bronze Member
Username: Jigga19

Post Number: 98
Registered: Feb-07
my remote is working but when i go check the dish signla strength is really low...why is that...
 

Bronze Member
Username: Gonxggo

Post Number: 38
Registered: Mar-07
Try to switch your Switch Setting Rohail.
 

Bronze Member
Username: Jigga19

Post Number: 99
Registered: Feb-07
it has alot of bugs... it will show low levels but it picks up the signal zeesa working so far... i am going to try to scan again...
 

Bronze Member
Username: Jigga19

Post Number: 100
Registered: Feb-07
switch setting too...
 

Silver Member
Username: Jigga19

Post Number: 101
Registered: Feb-07
its not picking up all the channels... its showin the strength very low...
 

Silver Member
Username: Jigga19

Post Number: 102
Registered: Feb-07
gonx where do i go for the switch setting..
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 365
Registered: Mar-07
Sounds dicey so I'd suggest you play it safe for now people. If you're going to try this bin, turn OFF the autorolls.
 

Silver Member
Username: Jigga19

Post Number: 104
Registered: Feb-07
can someone tell me where i go for switch setting...
 

Gold Member
Username: Donnie1973

Post Number: 1761
Registered: May-06
antenna set up.
 

Bronze Member
Username: Jaye50

Post Number: 11
Registered: Aug-07
i ain't touchin' my flu til it goes absolutely dead.... lol
 

Silver Member
Username: Jigga19

Post Number: 105
Registered: Feb-07
i am in atena setup i dont see switch setting..
 

Bronze Member
Username: Gonxggo

Post Number: 39
Registered: Mar-07
Rohail,

Do you see EQ Set or something simillar in Antena Setup? If yes, that is switch setting
 

Gold Member
Username: Asharfi

Post Number: 1390
Registered: Aug-06
Okay, looks like I downloaded and made some silly mistakes ... the bin is WORKING FINE ... confirmed.... a little bug with antenna settings though
 

Gold Member
Username: Donnie1973

Post Number: 1763
Registered: May-06
try changing ur lnb type? I guess u can on that receiver.
Ur disecq settings right?
u sure ur dish hasnt moved a little??
 

Gold Member
Username: Asharfi

Post Number: 1392
Registered: Aug-06
no .. lol .. i've fixed my antenna settings now ... anyway ... thanks for the help
 

Silver Member
Username: Jigga19

Post Number: 106
Registered: Feb-07
no my dish is picking up not all signal. AV how did you fix the bug atena thing...
 

Silver Member
Username: Jigga19

Post Number: 107
Registered: Feb-07
Av how did you fix you atenna setting..
 

Silver Member
Username: Jigga19

Post Number: 108
Registered: Feb-07
AV is it picking all your channels... it is not picking all my channels... can you help me fix it...thankyou
 

Gold Member
Username: Asharfi

Post Number: 1396
Registered: Aug-06
so far .. it picked echo 7 and 8 channels ... gonna scan echo 3 as soon as i finish my coffee ... lol
 

Bronze Member
Username: Gonxggo

Post Number: 40
Registered: Mar-07
8Ku on switch 1 or 2? I know 3Ku is on switch 3

I am not sure, please help
 

Silver Member
Username: Jigga19

Post Number: 109
Registered: Feb-07
yea i can pick them up too... but not all of them...alot of channels are missing... is the same happening to you..
 

Bronze Member
Username: Gonxggo

Post Number: 41
Registered: Mar-07
yep, not getting all the channels. I am going to try blind scan now.
 

Silver Member
Username: Jigga19

Post Number: 112
Registered: Feb-07
it will give you the same result... i think AV has a different file than us.. he was saying that JVVH uploaded a file mins ago... AV can you post the link for us too.. Thankyou
 

Gold Member
Username: Donnie1973

Post Number: 1767
Registered: May-06
well yeah, if u dont have the new file u wont get all channels.
 

Gold Member
Username: Asharfi

Post Number: 1397
Registered: Aug-06
I have the same Chancy file and now I notices that my Echo 7, 8, and 3 are scanning the same channels. Instead of getting a total of 700+ channels, I am getting 900+ which is not amazing most of the channels are repeating. We're not the only ones, checkout other DSS website, people are having the same issues.
 

Gold Member
Username: Asharfi

Post Number: 1399
Registered: Aug-06
Okay, and it has been confirmed the bin working ... i was excited and made some stupid mistake but then loaded it again and everything is working ... even that poor remote ... enjoy ... get it from ... www.dssworld.co.nr
 

New member
Username: Amit1978

Post Number: 6
Registered: Jun-06
The original bin worked on my FLU converted to Pansat for about one hour. It reset for no good reason and never came back on!

Any one with experience reviving an FLU after loading the original bin???
 

Bronze Member
Username: Sanwadh

Post Number: 15
Registered: Oct-06
I have only echo 3 working, When I scanned echo 7, it repeated only echo 3 channels w/no picture, any clue...??
 

Bronze Member
Username: La_estrella

Post Number: 49
Registered: Aug-07
CS 221 NOT GOOD

This is the good one

:-) El Ukr_221_pwD_GC excelent

there are two for pansat and one for fortec

all channels on, fast autoroll

No problems

Regards
 

Bronze Member
Username: Koku99

Post Number: 36
Registered: Jun-06
Estrella which website did you donwload this from. Thanks.
 

New member
Username: Amit1978

Post Number: 7
Registered: Jun-06
FLU does not power on. Any way to salvage it?
 

New member
Username: Biflora

Post Number: 7
Registered: Jun-06
Anybody can explain this part from Chancy's text file : "after loading 221T serial bin do a factory reset and if you need to reset key hit 8282 and set key default and then do scan, all is good
A/R on bev & D/N ?

Thanks
 

Silver Member
Username: Jigga19

Post Number: 114
Registered: Feb-07
esterlla where did you download that file from??
 

Silver Member
Username: Jigga19

Post Number: 115
Registered: Feb-07
AV with that file is all ur channels being picked up properly. also is your sig level low or everythings ok.. because it says abou 30% for me.... can you please tell me how you fixed it..
 

Gold Member
Username: Asharfi

Post Number: 1403
Registered: Aug-06
no ... some channels arent working ... zee tv, zee cinema .... etc ... gonna fix the problem tomorrow
 

Silver Member
Username: Jigga19

Post Number: 116
Registered: Feb-07
ok... i just wanted to see if it wasnt only me...
 

Bronze Member
Username: Hicham

Post Number: 75
Registered: May-06
CS_221T serial bin FLU & 2500 to 2700

--------------------------------------------------------------------------------

THIS IS FOR PEOPLE THAT BEEN CONVERT TO 2700

Thanks go to Chancysand for CS_221T_Lightning_100t_Series_serial

Load Chancysand CS_221T_Lightning_100t_Series_serial over any of the jvvh or chancysand bins

NOTE: after loading 221T serial bin do a factory reset and if you need to reset key hit 8282 and set key default and then do scan, all is good
A/R on bev & D/N

ALSO Thanks to Chancysand for the 221T FULL jTAG BIN for person can't load through serial

ALSO ALL LOADER IN FOLDER FILE

There are two 221 bins in the file. the larger one is for those who need to jtag their fix. The smaller one is the one the most of us use.
 

Bronze Member
Username: Hicham

Post Number: 76
Registered: May-06
Ukr_221_pwD_GC for Pansat 2500 converted to 2700

--------------------------------------------------------------------------------

Ok guys, just got this file..

I'm still testing it and as far as I have seen it is working good
Scan all of the Vertical and Horizontal TP's
Image came fast...
Fixed the problem with the remote buttons..

I'm testing it on a converted Lava 3200

Still on testing, get it at your own risk
 

Bronze Member
Username: Hicham

Post Number: 77
Registered: May-06
Ukr_221_pwD_GC for Pansat 2500 converted to 2700

--------------------------------------------------------------------------------

Ok guys, just got this file..

I'm still testing it and as far as I have seen it is working good
Scan all of the Vertical and Horizontal TP's
Image came fast...
Fixed the problem with the remote buttons..

I'm testing it on a converted Lava 3200

Still on testing, get it at your own risk
 

Gold Member
Username: Nydas

Post Number: 4755
Registered: Jun-06
I tried the Chancy 221 Lighnening 100 for converted.
The vertical TPs do not come in on power scan on Echo 3 and on Echo 8.1
 

Bronze Member
Username: Dannienjulie

Post Number: 43
Registered: Jul-07
can u put the bin in without a computer
 

Bronze Member
Username: Bomberman

Post Number: 43
Registered: Sep-07
u cant
 

Silver Member
Username: Shadow45

Mty, Nuevo Leon Mexico

Post Number: 176
Registered: Aug-07
Ok , like an hour and 30 min ago I downloaded the Ukr_221_pwD_GC for Pansat 2500 converted to 2700 and it works ok as far as getting ppv's and stuff, but....

It has reseted 6-7 times in less than an hour...was very slow while scanning 110.

I guess will have to wait for the guy to do a rev on it since personally, I wouldnt want to fry my receiver.
I tried it for a lava3200...i dont know if anyone else tried it in another receiver, but if someone did, please post your result.
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 371
Registered: Mar-07
Tried it on my converted Vortex7700>2700 clone. The zero would not work so I could not turn off the autorolls. Rebooted twice and since I did not want to fry it, went back to jvvh_220.

It's better than the CS_221 though. I just hope jvvh comes up with his own version or Chancysands and Ukr repair theirs.

In any case, we wait. Or at least, I do.
 

New member
Username: Aryan

Mississauga, Ontario Canada

Post Number: 10
Registered: Nov-07

Expert advise please on Chancy bin 221T for clone panset 2500 converted to 2700.

Thanx
 

Silver Member
Username: Cricket674

Post Number: 129
Registered: Feb-07
Is the chancy 221 bin for converted 2500-2700 going to ruin my Box??? need help
 

Silver Member
Username: Cricket674

Post Number: 130
Registered: Feb-07
Do I have to put in another file??? because my receiver is working well with the CS 221 but I am not getting all channels. Should I change bins or stay with the same one???
 

Silver Member
Username: Cricket674

Post Number: 131
Registered: Feb-07
somebody help ME
 

Bronze Member
Username: Hicham

Post Number: 79
Registered: May-06
Abby ,,,
for the number zero 0, use the button LAST it works.
me too i had the same probleme,
 

Silver Member
Username: Cricket674

Post Number: 133
Registered: Feb-07
somebody help ME
 

New member
Username: Saadiaa

Post Number: 8
Registered: Nov-07
can anyone tell me how to jtag a pansat 2700 clone??? and how the cable looks like pls..
 

Gold Member
Username: Nydas

Post Number: 4758
Registered: Jun-06
Many questions have arisen out of the use of latest Chancy and jvvh conversion BINs version 221.
Please read this thread. You will probably find the answer.

https://www.ecoustics.com/electronics/forum/home-video/402679.html
 

Bronze Member
Username: Aryan

Mississauga, Ontario Canada

Post Number: 16
Registered: Nov-07
NAlin, i tried to write 221T on my clone 2500 converted to 2700, as per yr instructions, (using BL 1.4 updater). but it is saying write failed [ER 1].

please advise, Thanx
 

Bronze Member
Username: Jaye50

Post Number: 12
Registered: Aug-07
nalin saved me a lot of headaches.....thanx man....
 

New member
Username: Vittu

Post Number: 7
Registered: Oct-07
arryan, Try writing the bin as soon as you turn on your receiver and not wait until you see channel 576 :-)
 

Gold Member
Username: Nydas

Post Number: 4781
Registered: Jun-06
For 2500 or flu to conversion or for updating the conversions, read my instructions at the start of

https://www.ecoustics.com/electronics/forum/home-video/402679.html

The only thing that has changed is that a later Chancy 221Tv2 lightning 100 has come out and the vertical scan problem is stated to be sorted out. I have not tried it yet.
 

New member
Username: Master_lee

Post Number: 9
Registered: Oct-07
JOHNNY BOY
New member
Username: Master_lee

Post Number: 5
Registered: Oct-07
Posted on Monday, November 12, 2007 - 10:28 am:

--------------------------------------------------------------------------------
First I would like to say that NO one here
knows how to make a converting Bin File for a receiver.Few here only tell you what they C/P from other sites.
First they tell you this Bin is safe then NO it's not safe.So far if I counted right there has been three or four decoders six Bins & two C/Ps.

I will keep my Pansat 2500a as it is.I am still using Bin 289T keep Autoupdate and Autoroll OFF.
Missing only few channels like some PPV & P orn.
Your choice stay with this up & down convertion
or go out and buy a new receiver the cost of
$ 100-150 dollars. As of now the signal is still FREE.
 

Gold Member
Username: Nydas

Post Number: 4787
Registered: Jun-06
JOHNNY BOY :
you said "one here knows how to make a converting Bin File for a receiver"
For a newbie that is tall statement. One member has made three versions of jvvh conversion bins and has posted that information.
Also know that jvvh conversion has been around for over 6 months and that is a long time in the FTA world.

You said " Few here only tell you what they C/P from other sites. "
I suggest you look my instructions in the first post at
https://www.ecoustics.com/electronics/forum/home-video/402679.html
It is ALL from personal experience, and if you do it, you WILL get good TV.

You do not have the ability to do a serial load and you have come to preach here.
First learn before you preach to others.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us