Pansat 2700a Help

 

New member
Username: Secretsniper

Post Number: 4
Registered: Jan-06
After I uploaded the last bin..I was trying to go to parental control and I accidently okayed the Factory Setting and all my channels and settings are deleted. Can someone help me with this.

Thanks a lot.
 

Bronze Member
Username: Bhund

Post Number: 80
Registered: Mar-06
Download The latest bin again.Go to parental and change keys.You will only get locals right now because dn is down.The new bin will be out early as today up to two weeks
 

Silver Member
Username: Donnie1973

Post Number: 260
Registered: May-06
Start over i guess. blind scan. unless u have ur channel list on channel master or something i guess.
 

New member
Username: Secretsniper

Post Number: 5
Registered: Jan-06
oh ok..what are the latest keys for DN?
 

Bronze Member
Username: Keanos

Post Number: 42
Registered: Dec-05
bin for pansat 2700
 

Silver Member
Username: Bazuka2020

Post Number: 445
Registered: Oct-05
The one posted at al7bar does any one tested it its not from bL so be careful, I request anyone who knows jtag should try and update please
 

Gold Member
Username: Lklives

Post Number: 4091
Registered: Jan-06
AGAIN...these are BOGUS old Pansat bins...should not harm your Pansat receivers...if the ones at al7bar are the same from Dsstester..all released today, from probably the same jerk..
 

Silver Member
Username: Bazuka2020

Post Number: 446
Registered: Oct-05
True its a joke dont waist time
 

Bronze Member
Username: Keanos

Post Number: 43
Registered: Dec-05
Thanks a lot.
 

Silver Member
Username: Bazuka2020

Post Number: 447
Registered: Oct-05
The forum at al7bar confirmed that its a fake bin and some folks have to jtag their receivers. fun is over
 

Silver Member
Username: Bazuka2020

Post Number: 448
Registered: Oct-05
CP al7bar
bgsxy
Title: Registered User
Rank: Cable Watcher
Status: bgsxy is online now

Profile
Join Date: May 2004
Posts: 30

Unhappy It's a fake!
The file does nothing but freeze your receiver and get your hopes up... I already tested it! Dirty b@stards...
 

Gold Member
Username: Evadelparaiso

Puerto Rico

Post Number: 1916
Registered: May-06
ECHOSTAR KEYS N2
Updated: Tuesday, August 22 2006 at 9:16 AM


--------------------------------------------------------------------------------
Dish Network:

N 0101 00:

84 4E 77 C8 56 91 5F BC
08 DE 10 D6 D2 91 7E F7

N 0101 01: (Active)

98 F5 81 B3 1E 96 00 3C
67 59 AE 1E D5 2E 1F D2

JOhn Do you need scan channels before go to parental control second pin and under nagravision 2 enter the keys.
For set your receiver set the date etc, select satellite, check the disqC lnb etc configuration. Check the signal and scan channels, later go to parental control second pin...
Lucky
 

Bronze Member
Username: Yo8bps

Post Number: 80
Registered: Jun-06
EVA : Alwyas right and on the money !! :-)
 

Bronze Member
Username: Minn_rock

Post Number: 85
Registered: Aug-06
Cris,u can say that again,Eva is an ANGEL.......
 

New member
Username: Secretsniper

Post Number: 6
Registered: Jan-06
Ok..here is what I get confused with

After I okayed Factory Setting, I did not have any of the options enabled except Installation, User Setup, System Informaton, and Factory Setting.

And after I click Installation, I have Anntena Setup, Blind Scan, and Edit TP/Satellite enabled.

I only get Echo 3/Ku at angle 61.5.

So, what should I do from start.
 

New member
Username: Secretsniper

Post Number: 7
Registered: Jan-06
When I do Blind Scan on Echo 3/Ku, it says "0 Transponders Found"
 

Bronze Member
Username: Albino_midget

Post Number: 77
Registered: Jul-06
you should go to antenna setup
and configure accordingly
when you get a signal then scan
 

New member
Username: Drphil

Post Number: 10
Registered: Jul-06
Probably this is not important, but I want you to notice that the current keys were last updated in August 18th, not the 22nd. I wonder why they stoped changing keys so frequently.
 

New member
Username: Secretsniper

Post Number: 8
Registered: Jan-06
"you should go to antenna setup
and configure accordingly
when you get a signal then scan"

Can someone tell me their configuration for Echo 3/Ku?

I get 73% Level and 0% Quality.

Any help will be greatly appreciated.
 

New member
Username: Secretsniper

Post Number: 9
Registered: Jan-06
anyone?
 

New member
Username: Secretsniper

Post Number: 10
Registered: Jan-06
anyone?
 

Bronze Member
Username: Herb_toker

POTTSVILLE, GRASSLANDS GREEN--LAND

Post Number: 100
Registered: Aug-06
LNB TYPE- STANDARD
LNB LOCAL FREQ- 11250
22KHZ- OFF
DISEqC- Port #? on your switch.
SKEW- -45
TP- xxxxx
POSITIONER- Disabled
SAT SCAN- ALL
 

Bronze Member
Username: Secretsniper

Post Number: 11
Registered: Jan-06
After doing all the scans I still did not get any results...

the quality is still 0% and to increase the quality I need to enter the keys. But to enter the keys I have to go through parental control which is disabled!

I really dont want to give the repair dude $20 bucks for nothing so plz help out!
 

Bronze Member
Username: Sls1970

U S A

Post Number: 13
Registered: Jul-06
have you tried doing a blind scan? I have to do blind scans on my 2700 or it will not pick up anything.
also make sure your lnb freq. is set to 11250 or it will not pick up tp's properly.
 

Bronze Member
Username: Secretsniper

Post Number: 12
Registered: Jan-06
Yes, I have done Blind Scans and only message I get is "0 Transponders Found"
 

Silver Member
Username: Herb_toker

POTTSVILLE, GRASSLANDS GREEN--LAND

Post Number: 130
Registered: Aug-06
If you dont have signal you cant scan anything.
You have to scan something before you can get to parrental controls.
Answer this:
Are you using a switch?and more than one dish?
What kind of dish?
Why echo 3 ku?
 

New member
Username: Itso

Renton, WA USA

Post Number: 3
Registered: Aug-06
Hello everyone .I need Bin and key for pansat 2700A and instructions how put the BIN and key.Please i need from HELP. HELP.HELP.
Could you please explain the ACTIVE key.
I don't get it.
Is this the "Provider ID" or "Key Number" in the Nagravision-1 window?
How do I enter the ACTIVE key from the remote control?
Thank you very much.
 

New member
Username: Grosspolluter

SO.Cal

Post Number: 2
Registered: Aug-06
You know your only going to get a few local channels right. Do you know how to flash files to your reciever? If so, download bin @ dsstester,com and use the latest bin for pansat 2700. I'm kinda a noob(newb), but I'll help as much as I can.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us