Switching from dn to bev

 

New member
Username: 5abi

Post Number: 10
Registered: May-06
hi, im currently on dn with only one satellite at 61.5 echo 3, since its down and i dont get my internationals im thinking of switching bev.
is this possible with my current set, i have a pansat 2500 clone, one satellite with one lnb.
where do i move my satellite to and what changes would i have to make in my recievers menu etc.
any help would much appreciated
thank you
 

Bronze Member
Username: 5abi

Post Number: 11
Registered: May-06
also is one satellite enough for all bev channels or will i need additional satellites or lnbs
thanks
 

Silver Member
Username: Hardrockstriker

Post Number: 154
Registered: Apr-06
You will need 91 deg satellite for bev. There is also 82 deg satellite but most channels are on 91. You can use your current dish, just repoint it. You will have to set your antenna setup to get Nimiq 1.3/ku. Also, put in lastest bev Nagra2 keys (provider id 09 00).
 

Bronze Member
Username: Vinidomine

Post Number: 88
Registered: May-06
I think... you should wait. by the time you get bev they might be running ecm too. it all depends how accessible your dish and know-how.

Vini
 

New member
Username: Tenpercent

Alabama

Post Number: 6
Registered: May-06
provider id for bev is 09 01. i believe most of the internationals are nimiq 2.
 

Bronze Member
Username: 5abi

Post Number: 12
Registered: May-06
thanks for the replies, since bev might also have a ecm, is starchoice a good alternative for now?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us