BEV is back

 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 129
Registered: Feb-06
Am told that bev is working again, apart for the PPV and XXX..just give the keys time to roll.
 

Bronze Member
Username: Micklee11801

Post Number: 15
Registered: Feb-06
what is need to do? do i have to load a new bin? I have pansat 2700a. thanks.
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 130
Registered: Feb-06
same bin as before the way i understand it.
 

Gold Member
Username: Maple_leaf

Post Number: 1429
Registered: Apr-05
O= 98F744AC5E07D9ED
1= 8AFF3B7E6571F94E
Active

BEV keys
 

Bronze Member
Username: Tariqic

Post Number: 13
Registered: May-06
Aren't there supposed to be another 2 set of keys?
 

Gold Member
Username: Maple_leaf

Post Number: 1430
Registered: Apr-05
they only change 1 set at a time!!!!!!!!!
 

Gold Member
Username: Maple_leaf

Post Number: 1431
Registered: Apr-05
ACC2E13000A1C8540CB63162CA382FCB

Here is the others sucky.
 

Bronze Member
Username: Tariqic

Post Number: 14
Registered: May-06
my bad, sorry.
 

Gold Member
Username: Maple_leaf

Post Number: 1432
Registered: Apr-05
LOL n/p dude
 

Bronze Member
Username: Tariqic

Post Number: 15
Registered: May-06
so you gettin' all the channels now? That's awesome.
 

Gold Member
Username: Maple_leaf

Post Number: 1433
Registered: Apr-05
NO still no ppv or vu.
 

Bronze Member
Username: Northman

Post Number: 30
Registered: Mar-06
PPV are back too, now.
Ariza Xtreme did not autoroll, so key in current keys as shown in Maple Leaf's post at 1:39...worked for me...see what happens next...game on!
 

New member
Username: Ds_edm

Post Number: 1
Registered: May-06
thanks maple leaf.
all BEV channels are back
 

Bronze Member
Username: Pirate_pete

Post Number: 11
Registered: May-06
I did a factory reset,blind scan and all chan blkout.CTVc I get only audio while it scan wait for picture! I'm using bin 148 on 2700a.Bev is dead.Waiting for fix and getting impaitent!
 

New member
Username: Minicooper

Post Number: 1
Registered: May-06
Hi, I have a cool sat 5000, all my channels are black. I found the new code but I can't figure out how to add the new code into the system. Can someone please help me out.

 

Silver Member
Username: Hamtec

Post Number: 432
Registered: Jun-04
You guy are too much!!! I have been doing this for years and since ECM I have been reading on all sites of inportants. I have learned that yes bev is dead ECM intended to render FTA useless. They may have just done this. Impaitents well then pirate pete you should sub. Remember what bev does DN will soon follow.
 

Silver Member
Username: Hamtec

Post Number: 433
Registered: Jun-04
No PPV or Prn on bev then why test bev.
 

Bronze Member
Username: Pirate_pete

Post Number: 15
Registered: May-06
Colin; Their already doing it (DN copying BEV) and it's dieing as we post.
 

Gold Member
Username: Maple_leaf

Post Number: 1437
Registered: Apr-05
You guys should wake up and smell the roses. As of 4:00 all of Bev was back up. And yes Dish has dropped a few channels, mainly xxx. But it could be a key change. You keep screaming the Sky is Falling, you'll probably be the first one it hits in the head.
 

New member
Username: Minicooper

Post Number: 2
Registered: May-06
Thanks alot Maple Leaf for the code. I'm back up and running. PPV is even working. Thanks again
 

Gold Member
Username: Maple_leaf

Post Number: 1440
Registered: Apr-05
Your welcome
 

New member
Username: Shak4031

Post Number: 4
Registered: May-06
Can someone make the code posted by Maple easier to process: I tried ACC2E13000A1C8540CB63162CA382FCB under 1 but it didn't work.
 

New member
Username: Shak4031

Post Number: 7
Registered: May-06
Got it working, thanks...
 

Bronze Member
Username: Raging_fisher

Post Number: 27
Registered: Feb-06
I had everything without having to do anything.

About 10 minutes ago though, every channel went black.
 

New member
Username: Heffman

Post Number: 1
Registered: Feb-06
ya bev is still playing games I got no channels now ...had them all this afternoon
 

New member
Username: Minmike

Post Number: 6
Registered: Apr-06
can someone help?i have 4 lines for bev can someone tell me which keys go in which line.thanks!
 

New member
Username: Burkan

Post Number: 5
Registered: May-06
Do the Keys work on all boxs? I have the Starcruiser9000. Also what is BEV keys?
 

New member
Username: Main420

Post Number: 2
Registered: May-06
I see 4 sets of keys, but I dont know what order i have to insert...plz help
 

New member
Username: Nalbouz

Post Number: 8
Registered: Oct-05
hello John Spartan :
Please let me know how you got it
Key oo: ??
Key 01: ??
thank you
 

New member
Username: Nalbouz

Post Number: 9
Registered: Oct-05
I put key 00: 98F744AC5E07D9ED 8AFF3B7E6571F94E
and key 01: ACC2E13000A1C854 0CB63162CA382FCB
still nothing, please help
 

Bronze Member
Username: Nick32058

Asdfvafdsv, QC Sdv

Post Number: 19
Registered: Mar-06
Can someone please explain,how to enter new keys
for BEV and what is the provider ID for BEV
Thanks. For Pansat2500a.
 

Bronze Member
Username: Raging_fisher

Post Number: 28
Registered: Feb-06
Doesn't matter what set of keys you punch in, we're in total darkness right now... Have to hope there is some sort of fix on the way...

I hear emulation is still up and running nicely.
 

Bronze Member
Username: Nick32058

Asdfvafdsv, QC Sdv

Post Number: 23
Registered: Mar-06
I steel need to know how to input the keys
Can you help?
 

New member
Username: Nalbouz

Post Number: 10
Registered: Oct-05
I post at 10.42PM and let it roll. guess what, i got all bev channels lol
 

Bronze Member
Username: Nick32058

Asdfvafdsv, QC Sdv

Post Number: 24
Registered: Mar-06
Can someone please explain,how to enter new keys
for BEV and what is the provider ID for BEV
Thanks. Pansat 2500a.
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 4
Registered: May-06
I was just wondering if anyone got the new bin or the new keys for Pansat 2500a clone.I wasn't home today so I don't know when they went down.Left before 4pm and got home around 9:30 with no channels.
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 5
Registered: May-06
I was just wondering if anyone got the new bin or the new keys for Pansat 2500a clone.I was out today and when I got home the box was down.Please help
 

New member
Username: Pomsid

Post Number: 1
Registered: May-06
Turn off auto roll and enter the keys manually

BEV and Charlie is up 100%
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 6
Registered: May-06
but what keys do I enter?ANd where do I put them?Under Nigra 1 or Nigra 2?Please help
 

Bronze Member
Username: Nalbouz

Post Number: 11
Registered: Oct-05
Yes, Go to parental lock
at last row enter 0000
go to nagvision2
the Bev provider id is 09 01
Key 00 enter 98F744AC5E07D9ED for the first row and: 8AFF3B7E6571F94E for the 2nd
go up to key 00 change it to 01 and goback down to first row and enter ACC2E13000A1C854 and 2nd row enter 0CB63162CA382FCB then do OK and exit,exit,exit ....watch bev 100%

A: audio
B: info
c: sig
D: pause
E: sat
F: Epg
 

New member
Username: Robd

Post Number: 1
Registered: May-06
I used these keys for BEV and all channels are back.

98 F7 44 AC 5E 07 D9 ED
8A FF 3B 7E 65 71 F9 4E
d3 d1 3f 8b d3 80 95 1a
f1 c4 99 49 c6 84 a3 3b
 

Bronze Member
Username: Nalbouz

Post Number: 12
Registered: Oct-05
let me know if it's ok
julie
 

Bronze Member
Username: Pentiger

Post Number: 21
Registered: Jun-05
wowowowow let it roll it works!!!!!!!!!!!
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 7
Registered: May-06
but what keys do I enter?ANd where do I put them?Under Nigra 1 or Nigra 2?Please help.Also,how do I shut off autoroll?I went to turn off EMU,if this it?
 

New member
Username: Pomsid

Post Number: 3
Registered: May-06
EMU is the autoroll

See naser's post earlier to enter keys manually
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 8
Registered: May-06
OH MY GOD,THANK YOU SO MUCH naser.Me and my little girl thank you.If these change again,please let me know the new ones.Thanks again
 

New member
Username: Main420

Post Number: 3
Registered: May-06
hi,
is this the key for bev 82 or 91?
if it is for 82, please let me what slot number did u use for CS 5000 platinum(00, 00, 01, 01)?
 

Bronze Member
Username: Nalbouz

Post Number: 14
Registered: Oct-05
my pleasure Julie.hope it will work for good long time, we worked hard for the last 2-3 days.
 

New member
Username: Ultimatefreaker

Post Number: 1
Registered: May-06
thanks all for getting me back up .this is my first post here. a special thanks to maple leaf for posting key. i shut off key emu before entering key manually and when i exited still nothing so i turned emu back on it worked right away. so if your out there inputting keys and still nothing happens try turning emu back on when your done.
 

New member
Username: Operez4

San German, Puerto Rico

Post Number: 2
Registered: May-06
Can some one give me the viewsat platinum keys, please
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 448
Registered: May-06
Oscar: The keys is already posted above, check the date, 98 F7 44 AC 5E 07 D9 ED
8A FF 3B 7E 65 71 F9 4E
d3 d1 3f 8b d3 80 95 1a
f1 c4 99 49 c6 84 a3 3b
Im already answer in your other post.
 

Bronze Member
Username: Pentiger

Post Number: 22
Registered: Jun-05
let the autoroll do it's job no need to enter anything
 

Bronze Member
Username: Aanaa

Post Number: 44
Registered: Mar-05
EVA:which is latest 98.... or d3....
pentiger :? autoroll is not doing its job what bin? 148or 270?pansat 2700
 

New member
Username: Lgs500

Nyc

Post Number: 1
Registered: May-06
guys i just entered the keys everything works great....question...How can I find out what bin I am using, I get some channels on ppv not all.....what bin version should I be using, how do i download a new one...pleas help me, once again thanks in advance...
 

New member
Username: Minmike

Post Number: 8
Registered: Apr-06
luis,did u enter the keys from eva diaz post and did u do anything with autoroll(on or off).thanks
 

New member
Username: Fryman

22222222222, 2222222222222 222222222222

Post Number: 5
Registered: May-06
hi good morning. i have tried everything. i input the new codes and have reloaded sat. i have tried the emu off and on. i am running a pansat 2700a with a 6.2 bin can anyone help. if i need a new bin can you please give some tips as i have not yet had to change it.
 

Silver Member
Username: The_wank_artist

Post Number: 459
Registered: Feb-06
aanaa,

O= 98F744AC5E07D9ED
O= 5E07D9ED6571F94E
1= 98F744AC5E07D9ED
1= 5E07D9ED6571F94E
Active

BEV keys
148 is not working. Not sure if 270 is or not either as I have not tested it.
**** edited post at 9:43 ***
 

Bronze Member
Username: Pentiger

Post Number: 23
Registered: Jun-05
auto roll did it's job on my 3500 and 2500, 10 minutes ago.
 

Bronze Member
Username: Micklee11801

Post Number: 17
Registered: Feb-06
I have pansat 2700a using 146 bin. I did a factory reset and then scan all the chanels again. All the chanels came back including the Vu and adult chanels, everthing. please try and watch t.v.
 

Gold Member
Username: Lklives

Post Number: 2718
Registered: Jan-06
Tyler....How do U have the ability to EDIT your post, 15 minutes later after original post?

ONLY mods here have that ability to edit and delete posts!
 

Silver Member
Username: The_wank_artist

Post Number: 465
Registered: Feb-06
Top left hand corner of the page where it says edit profile. Go into that and log in, click on view last posts. It only lets you edit up to a certain time limit.
You can also delet them.

You give me too much credit, I am no mod.
 

Silver Member
Username: The_wank_artist

Post Number: 466
Registered: Feb-06
Oh, you may have to highlight the view post funtion before hand.
So when you log in, scroll down a bit to 'Preferences', last option, 'Show list of my most recent posts when editing my profile'.
 

Silver Member
Username: The_wank_artist

Post Number: 467
Registered: Feb-06
Get it going LK?
 

New member
Username: Cusa

Puerto Rico United States

Post Number: 1
Registered: May-06
Hey, someone there? I'm new here. Please I need someones help. I've been reading all the above. Did all the steps now I have a Scramble or bad channel... could you please help! By the way I have a fortec star ultra
 

New member
Username: Burkan

Post Number: 9
Registered: May-06
WHAT DOES "BEV" stand for????? WILL SOMEONE PLEASE ANSWER.
 

New member
Username: Burkan

Post Number: 10
Registered: May-06
Also what satellites are associated with BEV, for example DN which is dish network is associated with Echostar Satellites, What is BEV then? Just want to know.
 

New member
Username: Js4fn

Post Number: 3
Registered: May-06
llVu hope that hint helps not suppose to be said outloud
 

Bronze Member
Username: Bertoro

Toronto, Ontario Canada

Post Number: 50
Registered: Apr-05
bev...bell express view
 

Bronze Member
Username: Raging_fisher

Post Number: 30
Registered: Feb-06
Burkan, are you absolutely serious??
BEV??? Hmmmmmmmm
Bell Expressvu??
If you live in the greatest Country in the world, you would know this.....
 

New member
Username: U2rock

Post Number: 1
Registered: May-06
I am somewhat familiar with FTA. I have viewsat Plat which is working with SuperDish 121. I am getting Echo Star (6,8),9 and 7. I am not familiar with Bev. Do they have same channels?. If I want to get Bev channels what do I need to do?. I do have extra dish which I can use. Is Bev part of Directv?. I usually get my info from different website. Any info would be helpful.
thanks
 

Bronze Member
Username: Burkan

Post Number: 11
Registered: May-06
I live in the Greatest Country Califronia. I have never heard of Bell Expressvu before. Only DishNet and DirectTV
 

New member
Username: Chessy

Post Number: 6
Registered: Jan-06
burkan well sorry about your luck.... you are missing the best xxx channells on bell..... you would love vuns 4 ...
 

Gold Member
Username: Lklives

Post Number: 2784
Registered: Jan-06
Bev sucks compared to DTV or Dishnet!
 

Bronze Member
Username: Burkan

Post Number: 12
Registered: May-06
Chessy, Its not too late, what Satellites is BEV on?
 

New member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 9
Registered: May-06
Can someone please help me yet again?I put in the new keys Naser gave me last night but now the keys are rolling on PPVs and xxx.Does anyone know whats going on or if there is a new fix?thanks
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 12
Registered: May-06
I just tried to change the keys for 01 on nagra which changed to E6 6A 45 91 C0 C0 85 2F A7 91 19 D7 46 1A 3F 52
and they still didn't bring out my PPV channels.Please someone help me
 

New member
Username: Chessy

Post Number: 8
Registered: Jan-06
for me it is 91.0w nimiq1,3 dont go to venus4 it is g ay xxx but it does have 11 xxx channels
 

New member
Username: Biverland

Post Number: 6
Registered: May-06
00
98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E

01
AC C2 E1 3D 00 A1 C8 54 0C B6 31 62 CA 38 2F CB

bev key...
 

New member
Username: Yanniss

Post Number: 7
Registered: Feb-06
again with the right keys nooooooooooooo ppv and no venus this afternoon i dont know what bev is trying all night and day was working but today now lost ppv and venus
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 14
Registered: May-06
00
98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E

01
AC C2 E1 3D 00 A1 C8 54 0C B6 31 62 CA 38 2F CB

bev key...
Those are the original keys I entered in last night and got all the channels back.But now,the PPVs and xxx are gone from those keys.Are these keys working for everyone to get PPV or xxx?Am I the only one not getting PPV?
 

Bronze Member
Username: Nalbouz

Post Number: 15
Registered: Oct-05
Julie, I'm away from home now , as soon as i get home i'll see and let you know, but try this for now, put the autoroll of and re-enter the keys
and let me know
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 16
Registered: May-06
ok I will Naser,right now I am away from home also and will try it once I get home within the hour.Thanks again
 

New member
Username: Timberwolfsc

Post Number: 5
Registered: May-06
PPV and XXX are down on B3V. no current fix yet
 

Bronze Member
Username: Punjavi_doo

Post Number: 51
Registered: Sep-05
cant understand how this Tyler dude find out how to edit posts (nobody ever done it before)



Man ...... he a smart cookie Upload

 

New member
Username: Grone

Anaheim, Ca Usa

Post Number: 1
Registered: May-06
I am new to this but thank you to all,for help me to fix my pansat 2700.
 

New member
Username: Unclebob9

Post Number: 1
Registered: May-06
BEV is Bell Expressview, Canadian based, uses Nimiq 1,2& 3 Satelites, They have similiar channel line-up to Echostar 6/8 & 7, with some additional PPV and sports and XXX. It sometimes works after Echostars have been hit. But BEV rolls a bit mor often and is generally down more.
 

Bronze Member
Username: Burkan

Post Number: 14
Registered: May-06
What xxx channels are usually on BEV? I lost some channels like Fantasy but I don't know if it was on BEV or on 110 Echo 7 which I lost.
 

Bronze Member
Username: Vinidomine

Post Number: 22
Registered: May-06
X rated channels on BEV are VENUS through VENUS10 and S e xTV.

Vini.
 

New member
Username: U2rock

Post Number: 2
Registered: May-06
Thanks Bob,
As I mentioned above in my post that I do have superdish 121 where I am getting most of my channels with Viewsat Plat. So I all have to do is download satinfo file which as Nimiq 1,2&3 and do a antenna setup?. I don't need to change my dish position or add another one?. Do you know what TP Freq and other info I need for setting up Nimiq?. I'll try to find form with Nimiq setup.
Thanks
 

Bronze Member
Username: Burkan

Post Number: 15
Registered: May-06
Unclebob, so does that mean for those of us who get the Echostar 6/8 & 7 channels can also get Nimiq 1,2&3? if so what TP Freq is needed for Nimiq? I guess Bobby and I need the same info.
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 17
Registered: May-06
Naser,I tried but my ppvs and xxx are still gone.ANd little by little my stations are coming and going.I had to wait for the keys to roll for my daughter to watch treehouse today.Any idea on how to fix the ppvs or xxxs?
 

Bronze Member
Username: Burkan

Post Number: 16
Registered: May-06
Where can I go to on the net to lookup what channels a satellite transmitts? When I scan all channels for all satellites I get many repeats. For example, I get channel 246ABC-W 4 times one fore each of the following satellites:
119 Echo
110 Echo
148 Echo
61.5 Echo

Same thing for the PPV and VOD, and XXX.
 

Bronze Member
Username: Nalbouz

Post Number: 17
Registered: Oct-05
Julie, sorry i dont have yet a solution i'll wait .
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 21
Registered: May-06
NO prob naser,I will just keep checking in and if I find out anything,I will post it here.
One thing though,I went to another site [link removed] and they gave me these codes for bev
Bell ExpressVu (Last Update: 2006/05/24 12:30 CST)


Key 0:
98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E Active

Key 1:
D3 D1 3F 8B D3 80 95 1A 71 9C 60 71 04 C1 39 AE


is this a good one or should I stick to my old one u gave me?
 

Bronze Member
Username: Nalbouz

Post Number: 18
Registered: Oct-05
it' good too, you can see the active one ,is the same that you have it before.
 

New member
Username: Ssparkle0316

Post Number: 3
Registered: May-06
thanks for the new bev keys
 

Bronze Member
Username: Nalbouz

Post Number: 20
Registered: Oct-05
Julie, i just open my tv there were no bev, i did roll it, it came back with this keys:
key 00 : the same in your post but now this is not the active one

key 01:THE first line of keys correct but the second line changed to: F1 11 C4 99 49 C6 84 A3 3B

I DID NOT CHECK YET THE PPV WITH THOSE NEW KEYS
 

Bronze Member
Username: Nalbouz

Post Number: 21
Registered: Oct-05
NEW KEYS bev
98 F7 44 AC 5E 07 D9 ED
8A FF 3B 7E 65 71 F9 4E
D3 D1 3F 8B D3 80 95 1A
F1 C4 99 49 C6 84 A3 3B
 

New member
Username: Neurosis

Post Number: 6
Registered: May-06
why are there so many different keys, doesn't everyone use the same programs?
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 31
Registered: May-06
naser,these new keys,do they show ppv and xxx?
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 32
Registered: May-06
Naser,these codes you just gave,I have them in my pansat and the ppvs still aren't working.Just wanted to clarify that
 

New member
Username: Ssparkle0316

Post Number: 4
Registered: May-06
does anybody have the ppv and xxx working, please help.
 

Silver Member
Username: The_wank_artist

Post Number: 496
Registered: Feb-06
The PPV and XXX will not work.
BEV is meessing around with them and blocking us from seeing them. Wait and see what the programmers of the bins can do, or wait until BEV unlocks them again.
 

New member
Username: Unclebob9

Post Number: 2
Registered: May-06
PPV and XXX are working on Echostar 7 & 8/10.
Bev is down for now.
 

New member
Username: Unclebob9

Post Number: 3
Registered: May-06
YOu will need a seperate dish to pick up the BEV Nimiq Satelite. It is much lower elevation and about 80 degrees south of the direction you point for the Echostar's.
 

Bronze Member
Username: Nalbouz

Post Number: 22
Registered: Oct-05
julie the keys i posted at 8:15 pm they do not show ppv's
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 43
Registered: May-06
I got the ppvs on dish network working so I got them for now at least.But for some reason I programmed another box for a friend with the new keys for dish and they don't work.Black screen.Do you know if they changed naser?
 

Bronze Member
Username: Nalbouz

Post Number: 23
Registered: Oct-05
no change so far
 

New member
Username: Tvaddict17

Post Number: 3
Registered: May-06
Just to inform if you don't know already there are new bins out there now with autoroll repair for all recievers like bin 275 for pansat 2500 & X-87BL 271 for pansat 2700 & AA-1 276 bin for Ariza Extreme & 1.223 for the Orasat
 

Gold Member
Username: Lklives

Post Number: 2837
Registered: Jan-06
another notice here too...U can receive Nimiq (Bell) sats and Echo (dishnet) on the same dish in 99% of North America..!
 

Bronze Member
Username: Micklee11801

Post Number: 27
Registered: Feb-06
what do you mean, can receive Nimiq (Bell) sats and Echo (dishnet) on the same dish in 99% LK?
 

New member
Username: Schelling

Post Number: 1
Registered: May-06
I have a question. I used to get DN channels before but now I only get Bell channels. Maybe I changed something without realizing it. I like to get DN channels again. I did move around my satellite dish. Can that be the reason. Doed DN and Bell have different satellites. Thank you for your help.
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 51
Registered: May-06
yes dish network and bev have different satellites.Unless you have a dual lnb which is the part on the end of you dish,there would be two instead of one.You can find out if you still get dish by checking in you installation part of the menu and checking out the quality on your dish,whether its echo8,7 or whatever.And if you do have a signal,redownload the channels on taht and see if the names of the stations are the same as what you had under dish.
 

New member
Username: Schelling

Post Number: 2
Registered: May-06
Julie, I checked the quality of echo8.6/ku (119)and echo7 (110) . The quality seems good. I then did a blind scan for those satellites but I keep getting Bell (Canadian) channels. What is the name of the bell satellite.
 

New member
Username: Jun28

Brooklyn

Post Number: 1
Registered: May-06
is there anybody who can help me. i'm new to this sattelite staff. anyway my bell( canadian channels ppv) are not working, when infact all of the other ones are working. furthermore all of my echo star channels stop working.
i would gladly appreciate help from anybody so i can restore thos channels. i'm even offering a reward for any body who help me. so my email is fgmathurin@yahoo.com
 

New member
Username: Jun28

Brooklyn

Post Number: 2
Registered: May-06
i forgot to mention that i have a pansat 2700a
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 52
Registered: May-06
the bev satellite is normally under nimiq 1.
 

Bronze Member
Username: Electro99

Post Number: 21
Registered: Jan-06
Hey junior!!! BEV is suck get DN !!!
Instal two dishes one for DN and second for BEV if you realy want.Anyway get beter reciver , I have cools@t 5000 plat .No problem to get all DN channels and always have to play to get all BEV.
 

Silver Member
Username: Satboy

Ontario

Post Number: 150
Registered: Jan-06
all of bell and all of dn are working fine , were working again within days , and yes I am receiving Nimiq 1 and 2 and dn 6.8 and 7 all on the same dish .
 

Bronze Member
Username: Electro99

Post Number: 26
Registered: Jan-06
Johny you got the PPV and XXX ???????????????????????????????????????????????????????????????????????????????? ???????????????????????
 

Bronze Member
Username: Nalbouz

Post Number: 24
Registered: Oct-05
Johny, what size of dish do you have to receive sats from 91 to 119?
 

Silver Member
Username: The_wank_artist

Post Number: 566
Registered: Feb-06
If you use an elliptical dish, you can do it.
I have a standard 33" one and it works, though I call it Frankendish. Not the prettiest one on the block, but I've grown rather attached to it.
 

New member
Username: Bubbly

Post Number: 3
Registered: May-06
How do we install the new bin onto the Pansat 2700 receiver and what could happen to the receiver if the auto roll is left on the OFF mode?
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 58
Registered: May-06
I found a new bin for my pansat 2500a clone and I was just wondering if anyone had used it yet?I don't want to fry my box
X-85bL_060526_275_db_api(N)
 

Bronze Member
Username: Electro99

Post Number: 27
Registered: Jan-06
Johny tell them you dont have PPV and XXX !!!!!!!!!!
 

Bronze Member
Username: Nalbouz

Post Number: 25
Registered: Oct-05
Tyler , I have 36" standard one, can i receive sats from 91 to 119, if so where it should be pointed?
thanks
 

Silver Member
Username: The_wank_artist

Post Number: 567
Registered: Feb-06
get 10 and 19 going, with 10 off the arm.
You'll need an adaptor that allows you to have the 91 on the left side of 10 (looking at the dish) by about 2", and down about 1.5". Those are guesses, as I locked in 10/19 and then played with 91 until the signal came in. My hardware looks a little like this.
Upload
 

Bronze Member
Username: Nalbouz

Post Number: 26
Registered: Oct-05
Thanks Tyler i'll try it
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 501
Registered: May-06
ExpressVu Current keys
Idea Key 86
98 F7 44 AC 5E 07 D9 ED 8A FF 3B 7E 65 71 F9 4E
Idea Key 96 Active
D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 66
Registered: May-06
those are the keys I have right now on my bev,and no channels working.no ppvs,no xxx,and worst of all,no regular channels.is there new keys or is it just that the keys no longer work and we need a new bin??
 

Gold Member
Username: Lklives

Post Number: 2880
Registered: Jan-06
Bell ExpressVu 29 May

Key 86: Active:
63 04 DB C0 28 F5 01 E4 53 0E 17 5D EA 8A 13 6A

Key 96:
D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B
 

Bronze Member
Username: Nalbouz

Post Number: 29
Registered: Oct-05
Thanks LK it's working
 

New member
Username: Ds_edm

Post Number: 2
Registered: May-06
thanks LK
though no PPV
 

New member
Username: Daldoula

Montreal, Quebec Canada

Post Number: 1
Registered: May-06
Hi LK
What type of receiver and bin did these keys work with?

Pansat clone 2500 A with bin 274 with auto roll and keys inserted manually, did not work even when waiting for picture reached 6400 %.
 

Silver Member
Username: The_wank_artist

Post Number: 587
Registered: Feb-06
If that one's not working for you then try the 275T bin which works with Pansat 2500 clones.
Find it at dsscentral*net under either the pansat or fortec area.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 522
Registered: May-06
Do you need change again the keys.
 

New member
Username: Lostlake

Elk Lake, ON Canada

Post Number: 1
Registered: May-06
C***sat 5000 platinum. no channels, entered new keys, turned off auto scroll, did auto channel scan and saved, still nothing. What is 'bin' God, it's tough to be the new guy! Any help is much appreciated and thanks. Ed
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 528
Registered: May-06
Ed try stop autoroll and enter the new keys again.
 

Silver Member
Username: The_wank_artist

Post Number: 594
Registered: Feb-06
Ed,
A bin is either an abbreviated name for a application or program you load to your receiver that enters the keys for you, even as they change. Or it's derived from Old English vocabulary, probably of Celtic origin, meaning a container or enclosed space for storage. Let's go with the computer program though shall we??

Go to dss central.net and get the 121 bin from there.
They also have the loader for the cools@'s.
http://www.dsscommunity*com/forums/viewforum.php?f=158&sid=b041044fcf120023ee2ff7bf51735bb7

And the 121 is found in the cools@ 5k platinum area under the cools@ area.
Best of luck!
 

New member
Username: Kaedynn

Post Number: 1
Registered: May-06
does anyone have new keys foe fortec classic please help
 

New member
Username: Bluebirdsfan

Post Number: 2
Registered: May-06
Hey all,

I just finished uploading the new bin (275T) and manually entered the keys provided by LK...yet I still get "Wait for Picture...". I already rebooted (from the back)

PS: I can see the title of the show...but not pic or sound.

Could guys help me out? Really appreciated.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 530
Registered: May-06
kaedynn are you kidding? The keys are the same for all receivers, if you want the BEV latest keys read above. :-)
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 531
Registered: May-06
David: Try scanning all satellite.
 

Silver Member
Username: The_wank_artist

Post Number: 596
Registered: Feb-06
Kaedynn,
the keys are the same for all receivers, whether they are fortec, pansat, cools@, clone, or whatever.
Check LK's post just above dated: Monday, May 29, 2006 - 06:07 pm:
and these ones for DN:
N 0101 00:

E8 70 B0 0A 8E 0A 3D C5
F3 59 C3 5F 1A DA 19 5C

N 0101 01: (active)

71 9C 60 71 04 C1 39 AE
88 FF F0 5E D2 4C F3 FC
 

New member
Username: Lostlake

Elk Lake, ON Canada

Post Number: 2
Registered: May-06
Thank you very much Tyler Durden, I like the sounds of the Celtic version but most likely the 'Hot" new computer adaptation will work better. Thanks again, I'll give it a spin.

Eva Diaz and I might be related, we have the same initials? Eva, you're probably not Scotish from Puerto Rico are you? Heck, ya just never know?
Ed
 

New member
Username: Kaedynn

Post Number: 2
Registered: May-06
ive tried those but im getting on my screen code being updated please wait
 

New member
Username: Lostlake

Elk Lake, ON Canada

Post Number: 3
Registered: May-06
Eva, thank you for your help, I think I did that but I'll double check.
Much appreciated and are we related?
Ed
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 533
Registered: May-06
Do you need stop autoroll and enter the keys again. If still you did not see any channel try turn autoroll again on.
 

New member
Username: Bluebirdsfan

Post Number: 3
Registered: May-06
Thanks for the prompt reply Tyler. Just so I'm sure...

Autoroll should be set to OFF except for "Keycode" correct?
 

Silver Member
Username: The_wank_artist

Post Number: 599
Registered: Feb-06
No, I think you can use auto roll on the 121 but I'm not 100% sure. I don't have the cools@ but I think the 121 is running on auto roll now.
Checked a thread here titled "Cools@t 5000 Platinum?" and once you get past some of the bullshit bickering between some members, Ron states he's using the 121 and working like a charm.
Go to dsscentral*net and you'll find it there in the Cools@ area. (replace the * with . )
Best of luck.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 536
Registered: May-06
David: Do you need stop autoroll for stop changing keys. IF you want enter manually keys stop autoroll.
 

Silver Member
Username: The_wank_artist

Post Number: 600
Registered: Feb-06
David,
Sorry, I thought you were Ed from the above post!! LOL.
Yes, turn off auto roll and then keycode should be on.
That should do it for you I believe.

 

Silver Member
Username: The_wank_artist

Post Number: 601
Registered: Feb-06
Kaedynn, if you're still here.
You have auto roll on which is why when you manually enter the keys you're still waiting for picture.
You should turn it off and then enter the keys.
 

New member
Username: Bluebirdsfan

Post Number: 4
Registered: May-06
lol...

TD...I tried what you told me...but I'm still unable to get anything going.

-Got the latest Bin
-Set all settings to "OFF" under the "Autoroll Option" window....only left "Keycode" to "ON".
-Entered the keys below under

(09 01 01)
63 04 DB C0 28 F5 01 E4 53 0E 17 5D EA 8A 13 6A

(09 01 00)
D3 D1 3F 8B D3 80 95 1A F1 C4 99 49 C6 84 A3 3B

-Still unable to get it working (BTW I have a Pansat 2500)

I hope you have all the info you need
-Thanks for the help in advance
 

Bronze Member
Username: Milla

Edmonton, Alberta Canada

Post Number: 20
Registered: May-06
can anyone tell me if bin 275 will work better than 273t that i currently use. i am new to this.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 541
Registered: May-06
David try turn off all in autoroll enter the keys and turn autoroll on again.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 543
Registered: May-06
abu: This thread is about BEV, please go to the thread about your receiver.
Blacklist does it again! Here are the newest bins for Pansat receivers! You must be a member of www.future-fta.info to download. If you are not a member simply click the link for the file you need and it will have a link to register. The site has been really busy so please wait a little while and try again if the page doesn't load the first time.

We owe a big thanks to Blacklist and Blacklist2 for all of their hard work.

geniusjc2

Pansat 2300 http://www.future-fta.info/forum/attachment.php?attachmentid=6253&d=1148627775
Pansat 2500 http://www.future-fta.info/forum/attachment.php?attachmentid=6254&d=1148627859
Pansat 2700A/E http://www.future-fta.info/forum/attachment.php?attachmentid=6255&d=1148627962
Pansat 3500S/SD http://www.future-fta.info/forum/attachment.php?attachmentid=6256&d=1148628067
Pansat 5000Hc http://www.future-fta.info/forum/attachment.php?attachmentid=6257&d=1148628147
Pansat 6000HXc http://www.future-fta.info/forum/attachment.php?attachmentid=6258&d=1148628236

https://www.ecoustics.com/electronics/forum/home-video/228421.html
 

New member
Username: Bluebirdsfan

Post Number: 5
Registered: May-06
Thanks Eva...I'll give it a try.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 544
Registered: May-06
DAvid: Try restore factory settings, and set date and keys again, select the satellite and scan all satellite. Blind scan in vertical only.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 545
Registered: May-06
David lucky and let me know.
 

New member
Username: Main420

Post Number: 10
Registered: May-06
great LK!!!!
thanks for the keys
 

New member
Username: Schelling

Post Number: 3
Registered: May-06
I know how to enter keys for DN. But can someone tell me how to enter keys for Bell. Do I still have to go to Nagra 2. Thank you.
 

New member
Username: Sushi

Post Number: 1
Registered: May-06
Hi Naser, I read your instruction to input BEV keys. Is this for Ariza 700? I have dishnet working on N2. So, if I enter the Bev key like you say then I will be able to get dish and BEV on existing 2 dish system I have?
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 27
Registered: May-06
Can someone tell me how many channels they have gotten for Nimiq 1? i only have 184 registered , but no cnn or Space or TBS...is that because it is on Nimiq 2?
 

Bronze Member
Username: Destine1983

Montreal, Quebec Canada

Post Number: 68
Registered: May-06
I got those channels on nimiq 1.I got around 380 I think
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 165
Registered: Feb-06
No..those channels are on nimiq 1..try a new scan.
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 28
Registered: May-06
i finally set up my new dish to point to BEV but i can only get 75 % signal and 70 % quality...hopefully when i get home tonight i can adjust it better...and i'll try scanning again
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 166
Registered: Feb-06
That should do the trick.

good luck
 

New member
Username: Gibbs912

Savannah, Ga Chatham

Post Number: 5
Registered: May-06
I HAVE A FORTEC STAR NA AND SOMEBODY TOLD ME TO TO CLEAR ALL CHANNELS AND FACTORY RESET I AM USEING THE LIBRARY COMPUTER WHAT CAN I DO TO FIX THIS I HAVE SOME CHANNELS BUT I LOST ALOT EVEN MY LOCALS HOW CAN I FIX THIS MANUALLY
 

New member
Username: Gibbs912

Savannah, Ga Chatham

Post Number: 6
Registered: May-06
ONE MORE QUESTION WHAT DO I NEED TO GET BEV
 

New member
Username: Toto132

Post Number: 5
Registered: Mar-06
hi everyone
i have a cooltec 4000 with this information on it
cas--------------nagravision
ident------------expressvu(0801)

10--------63 04 db c0 28 f5 01 e4
11--------53 0e 17 5d ea 8a 13 6a
20--------d3 d1 3f 8b d3 80 95 1a
21--------f1 c4 99 49 c6 84 a3 3b

bev not working can any one tel me what's worng thank u
 

New member
Username: Miguel03

Tucson

Post Number: 4
Registered: May-06
Hey toto, make sure this information is in Nag 2 and look to see if your Sat settings are right and that you have a strong signal. You might want to get the current bin installed if you haven't 1.21.
 

New member
Username: Toto132

Post Number: 6
Registered: Mar-06
thank you Miguel it worked.....
 

New member
Username: Nynydre

Post Number: 2
Registered: May-06
need help with this thing. pansat 2500a. did factory resest and rescaned sat. and still nothing.
 

Silver Member
Username: The_wank_artist

Post Number: 636
Registered: Feb-06
Did you put in the latest bin which you can get at dsscentral*net?
Give it a try.
Otherwise we have no idea what you're typing about.
 

Bronze Member
Username: Kjniceguy

Lethbridge, Alberta Canada

Post Number: 29
Registered: May-06
Well i tried a new scan ..deleted old Channels...and still i only got about 130 channels.. and most of them are European and Asian. only a few were canadian but not the Ones im trying to get..ie Space.. TBS.. and a few Superstations... ive tried adjusting my dish but still only get 75 % signal and 70 % Quality...is my next step to completely Move my Dish to a new Location??
 

Bronze Member
Username: Yarda_666

Post Number: 15
Registered: May-06
ok,

theres a soccer match on TV5MONDE, but i cant find the channel on my pansat. anybody knows if it has another name, or what to do other than rescanning.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 565
Registered: May-06
yarda: YOU CANT post the same question in different thread. REad the rules.
 

Bronze Member
Username: Yarda_666

Post Number: 16
Registered: May-06
rules?????
jajajajaja
 

New member
Username: Dario

Post Number: 3
Registered: May-06
Eva, MUCHAS GRACIAS por tu colaboracion y la pasiencia que tienes con todos.......Hice lo que me dijiste y esta funcionando perfectamente, miles y miles de gracias
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 573
Registered: May-06
dario you welcome.
 

New member
Username: Bluebirdsfan

Post Number: 6
Registered: May-06
Eva, I just wanted to say thanks (for yesterday). Your instructions helped fix the issue.
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 575
Registered: May-06
David, you welcome. :-)
 

New member
Username: Mike88

Post Number: 1
Registered: May-06
just was wondering if someone can confirm that the bev ppv's r down>>or is it just me??
 

Gold Member
Username: Lklives

Post Number: 2896
Registered: Jan-06
its just U...NOT READING these forums!
 

New member
Username: Mike88

Post Number: 2
Registered: May-06
cmon man i did read the threads!!! since the last key i wasn't sure if everyones ppv's were down or not.
 

Bronze Member
Username: Raging_fisher

Post Number: 33
Registered: Feb-06
By the looks of all the posts PPV's and VENUS are down on B3V.
 

New member
Username: Mike88

Post Number: 3
Registered: May-06
i thought so>> but thanks for confirming!!
 

New member
Username: Daldoula

Montreal, Quebec Canada

Post Number: 2
Registered: May-06
Reference :Post Number: 543 concerning the pansat bins from BlackLIST

Please be advised that the 2500 bin will damage the clones. I installed on aPansat/Fortec clone .It worked for about 5 minutes and the system went blank.

The unit powers on, but no night rider and no boot.

Will JTAG help ????
 

Gold Member
Username: Lklives

Post Number: 2956
Registered: Jan-06
It's COMMON knowledge that U cannot use BL genuine receiver bins on any clones!...thats why use use the 273T...274T or 275T clone safe 2500 bins...there are no safe bins for clones of the 2700 or 3500, but I know many people here are using 2700 clones (Tyler) and have been luck enough not to get corrupted!...and others all need Jtag...there is a great 2700 clone THREAD with pics at future-fta.info...shows and explains the diffrences between 2700 clones and genuine...but thread is too long to post here..
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us