I"m Stuck

 

Anonymous
 
I'm having trouble with switching 110 to 119 when trying to scan the sats. 110 (echo 8.6) completes ok but when I try to scan 119 (echo 7) I can see that it won't switch. I have 110 on lnb 1 and 119 on lnb 2 with the original switch that came with the pansat 2700a. If I connect 110 alone and scan it all channels work, and do the same for 119 it works, but when I connect the switch I can't get it to switch between the two. Do you think it is a problem with the switch or a programming problem? Any help with this would be great.
 

Bronze Member
Username: Thill1951akalk

Post Number: 25
Registered: Oct-05
sounds like U have it narrowed down to the switch..try swapping the cables in switch and see what happens..I think U have a bad switch...also make sure U have the correct settings in your FTA system setup..(110-port1,119-port2 and try vice versa)
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us