|
Bronze Member Username: Slo_hand2Post Number: 11 Registered: May-05 | I have a dish 500 dish and a dishpro lbn setup, I am using a Pansat2700A with a DiSEqC 4x1 switch but can not get any quality signal at all. The level is at 80% at the moment. I also have an old sony single lbn dish that I used when I had directv, this dish works fine by it self I guess Im getting echo 6,8 with it,the first channel is the history channel international. When I try to use the dishpro I get nothing. I read somewhere that I have to change all the horozontals to vertical (TP EDIT) but not sure and before I do this I need to know if that is correct? I want to get the best use out of the dishpro lbn's but as you can see I'm not, can anyone help? My Lat is 34'3.348N my long is 78"54.966W I set the AZ to 237" the el @ 35 and the skew at 130 can anyone confirm these figures for me? please!and tell me what else I might need to do to get a signal. any help would be appreciated |
|
New member Username: P2bPost Number: 3 Registered: Jul-05 | Try these [link removed] http://www.lyngsat.com HTH The P2b |