No sound from Sub in stereo mode. Help!


Got the NAD 762 driving Paradigm Ref. Studio 60's and a Paradigm 10" sub. While in stereo mode, no feed is getting sent to subwoofer. Are my speaker settings off? Have fronts and center set to large and don't know if this is correct. Any help is appreciated.

There must be a setting in the receiver's setup where you can set the sub to "Both". That way the bass will go to BOTH your large speakers and the sub...

...or you could set the fron speakers to small.

Hope this helps.


This not unusual in any brand of receiver. In stereo mode, the audio signal is sent only to the two front main speakers. If you want the bass info to be directed to the subwoofer, you need to choose "Downmix" mode rather than "Stereo." At least that is what I read in the NAD T762 Product Manual, online (p.20).

I hope this helps.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us