Help with picture

Ive got a freeview, Dvd and Dreamcast plugged into a scart adapter but the picture is really flickery when i play the dreamcast and dvd. When i plug each thing in seperatly using the scart lead it works fine. Is it my tv coz its 50hz and a bit old or is it th scart adapter?

You cannot play multiple media in one input without having problems or unless you have a switch that totally isolates the other equipment. It is not the TV it is the amount of units you have plugged in all at once.

you tryin to get your post count up with things like that berny!!?? lol

THIS IS OUR NEW THREAD EFFECTIVE NOW !

our last thread 4 some damn reason is taking 4ever 2 load so guys

NEW RULE : New Thread after 100 posts please ! since most of u know im on sucky dial up

Anyway i been emailing with FI owner Scott & 90% sure i will b ordering a fully optioned 15 BLT from him soon when he answers some other final ? i asked him .

1 ? I asked was if a 15" BLT can take out a atomic apx 15" & he yes it will easily & plays lower freq bass too which i so love ...........

cool rovin. just like the good old days. you are leading us to a new thread. lol.

damn that ticket sux.

like you said at least you were loud. lol.

hey guys i am about to order a box from woodlawn cabinetry. its going to be expensive as hell but i think its worth it.

go for it.

i wish i had the funds to buy a new sub...

i will probably never get one.

y sealed muddy??? u gotta convince me

& i thought chad was "Mr. builds a box every wkend" - lol .....

lol where is the punch line chauncey?

i always wondered how it would sound if some professional guy builds one.

i guess. but he does a lot better job than i do. also he braces it well.

uhh. wreckless isnt supposed to be in these threads is he? lol

yo. i got a question. When you are gonna make a trunk box, and you have the slanted back and stuff. you go to www.the12volt.com. and go to the wedge box, enter in the specs to get the desired box volume, and then you go over to subwoofertools and enter in the box volume and specs and stuff. but that will only give you the length and heights etc of a square shaped box... so how you know the lengths of a wedge shaped box, if ya know

im good with makin square boxes and sh!t, just not wedge stuff and round

no, not a slanted face, just a reg stright face, then an angles back. a truck box...

hown would you do that, like what are the steps

" to receive it."


thats funny to me

yeah... i was rolling on the floor for like 10min..lololol

u sissy & ur damn SQ -

while im getting a fully loaded 15" BLT - now thats a man's sub ...lol...

...

lol rovin. BLT is a burger at mc donald's. lol. a 15 inch hamburger would be a man's burger.

dam guys. answer my question! lol

is that how you would do it? go to the wedge design on the12volt.com, then enter in desied volume, take those nuumbers, and then go over to subtools.com?? but subwoofer tools would only give you a square design for the box specs you just found on the12volt... so how do you know how long everything needs to be and stuff?

you can't bassman. the subtools is only for square boxes. you would need some other program for that.

i just go by marshall white's rule. 10-12sq in of port per cube.

holy sh!t
LOL
cant beleive its tru!!!
BOUT time man
and also good for u
how much did u sell them for outta curiosity

no matter who sez what i still love those subs

shhhhh - dont tell no1 but it works out to $285 & i used them 4 about 8mths - guy knows USA price but he really wanted these since march but only wanted 1 then now he is selling his car & getting a Nissan Xtrail so it will go in there . Heck he is happy & i got a good home 4 my babies so we both happy -lol ........

in all honesty....you will NEEEEEEEEEVER EEEEEEVER make a ported box that has the control of a sealed one....b/c when you tune low....depending on how much port area you have, you lose control of the sub at lower freq....and if oyu don't have enough port area, it sounds like crap...also...they take up more space....and the lower you tune, the more control you lose at higher freq.

Sealed boxes arent that far behind a ported enclosure imo. if you give the sub ample air space and brace it well, can be better than a half-a** ported box.

besides....i am out of the "loudness" stage, i listen to rap maybe once every 2 weeks now. lol
and BAss MEkanik like once a week...and i am good on my bass fix. oh well....me and my sissy SQ willbe able to hear in another 30yrs. j/k

er um ok there mr. sq muddy - lol

u getting a BLT too chad !? wtf ! dont tell me u gonna get a 18" & da fact is u also have a wcc amp like me but i will own u with my rides better acoustics , but none d less we both gonna have similar killer setups - lol .......

i bet they both will slam

damn u 4 getting 2 15s - 2 15s will def kick my @ss -lol

i already asked scott a few days ago that i want my 15" fully loaded with all d mods - hell i might as well go all da way , he said it will own a APX so thats what i want .........

its only" 90$ more so thats y im going all da way - so y dont u do just 1 modded 18" then

c its like this a 15" cmpx2 is $476 here while a BLT will cost $380+ $90 = $470 + some s/h & tax 2me here

a mmats 15 jugg costs here about $600 & is "only" 1400wrms & not as musical so i think im still coming out good in d end & no1 in T&T will hav or kno wtf a BLT is -lol

ANY sub box im going 2 build 4 myself in d future will be 1" thick mdf ......

i was gonna go with a single 18 but i decided to go with the 15s cause i wanted to see how loud it will be in my car with 5000wrms. lol. 2 18s would be hard to install in my car without a wall.

you know whats up with your stuff. damn you got it all figured out. you are gonna kick some azz at the comp.

btw will you stop calling it BLT. lol. it makes me want a burger bad right now. i am cutting down of fast food. (notice i didn't say quitting fast food. lol.)

shweet. r u gonna customize d amp rack hoss? u should. neon lites and all teh gud stuf. well maybe no lights but bling bling your car jed.

chad, what site you use for ur box? the one you showed that has the slanted back

Hey i ordered 2 of those premier 960's from Mick...and they are really really nice..

Y
A
Y

F
O
R

R
O
V
I
N
!
!
!










lol

lol. j/k, i love my 8600

honestly i think the 05 line is better then the 06 line...

sup ppl - been quiet here on ecou 2day

i noticed since i slowed down my posting on ecou that CB has taken me over -lol

well thats no problemo bro...

<<<<nice smiley i found ...

i passed u once b4...but u caught back up in no time

btw nice chauncey and rovin. looks like you guys are gonna hit platinum by next month. congrats to both of you.

what should we do to celebrate this monumental occasion?

holy sh!t Chad have you been on a posting bender or what? when did you get up that high? I am going to have to start comin gback every day so you loose lips punks dont send me to the gutters lol

Chad had more than me like 3-4 weeks ago. LOL

you guys are a bunch of P O S T W H O R E S !!!!!!!!!!!!!!!!!!!!

well i guess we r post h/oes & we r mighty proud of it ......



sup James - u posted so much last time u were on ecou like u took a short ecou vacation - lol ....

in fires that big, heat is the biggest factor as to why they burn and burn and burn...pouring water on something that has a bed of molten hot embers that spread over a few miles does little to nothing. lolol


hope you stay safe though Chad!

check out this sh!t from Scott of FI

"The BTL15 is 65 lbs shipped with all of the mods to it and including the shipping crate."

i was expecting high in d 40 pds range but thats just a bad @ss heavy sub !

u can call a dick stretcher cause of its weight - lol ......

holy hell mang..........that is REDICULOUS!!! lol

says i have to login

rofl rovin. damn funny thread.

i am a member of that forum too muddy thats how i am able to read it. lol.

ya chad

its disgusting but funny @ da same time - LOL !


its 4 this same reason i have stopped bathing in beach yrs now - cautious of sometin nasty being in d water .........

so....i talked to Scott, and with my RMS wattage and the sealed box i plan on putting the sub in, it will reach max excursion at 20hz with 900wRMS.

sounds good to me lol

he started talking about low and high Q of the enclosure(Qtc) and i was like. huh........lol

hahahahahahaha


i would buy one tonite if i had the dough...

I just saw jackass 2 and it was F'ing funny as SH!T

thats d stock version - my BTL will have 3 magnets & all d possible mods done 2 it

scot told me it can take 5,000wrms but suggests 3000wrms in a daily driver .....

lets roll out lol

http://www.ecoustics.com/electronics/forum/video-games/226447.html

lol..... i didn't say you weren't in it. its just you and bassman joined when i wasn't around or something. you know i love you man.

btw i left nemen out of my list. damn sorry nemen.

Funny.....

It's a funny way.