Like

Phono/Turntables

 

New member
Username: Imp88

Post Number: 1
Registered: Dec-06
Dear Readers,

I have in my possession a Sansui Model 370V. There is a hum using the Sansui Model 370V. The wires were connected as follows:
1. Red and Green were connected to the Centre and outer RCA Cable or cable with a screen over the centre cable.
2. Blue and White were connected to the Centre and outer RCA Cable or cable with a screen over the centre cable.

The cable is about a 1.5 metre long connected to the Equaliser Phono input (with a variable volume output). Was there any thing that I did wrong that causes the hum.

Thanks for the help, readers
 

Platinum Member
Username: Project6

Post Number: 11748
Registered: Dec-03
Wrong forum, Cheng.

Next time go to the Home Audio" Forum, there is a section there that states "Phono"

http://www.ecoustics.com/electronics/forum/home-audio/21.html

But it seems like your problem is a ground wire. You need to connect that to the chassis of your input device.
« Previous Thread | Next Thread »

Facebook

Main Forums Today's Posts

Forum Help

Follow Us