I have a rca t.v with 2 audio out and 3 audio in and 1 video and samsung vcr with 3 line in 3 line out and cable in and cable out and toshiba dvd SD3980SU2 with video and beside 3 video out components and underneath s vdieo jack out and 2 audio out and a coaxial digital audio out. I had it hooked up and had to dismantle to change cabinets. I had used male/female connectors from my dvd originally as not enough male connections at back of t.v. Now i can't figure out how i connnected it. The vcr is hooked up alright and can see it, but nothing else. Cable is hooked up to vcr and t.v. Please advise by sending email to firstname.lastname@example.org.
i can't do it as on my t.v i only have 2 audio in, 2 audio out and 1 video, the t.v is 17 years old.How about using splitter audio cabes and hooking t.v to vcr in . My vcr has under line in y, r, w and under line out y. r, w and the DVD has on one row, video out jack and then component video out jacks y, pa/pr and underneath that row is s video out jack and l/r analog audio out jacks and then coaxial digital audio out. All need to be hooked up to a non digital 17 year old t.v with only the r/w audio out and r/w audio in and 1 video jack.