Magnavox MS-3250

 

New member
Username: Garyc

Post Number: 2
Registered: Jan-07
When 1st turned on the screen has a wavy line about 2-3" wide on right had edge. Most of the time it will than shut off. After 2-3 time it will stay on and after a few minutes the picture will clear up. B+ fluctuates from 128 to 140, just before it shuts down. Have replaced all the HV caps with no change.
 

Silver Member
Username: Stevestar99

Dahlonega, GA

Post Number: 120
Registered: Nov-06
You got a bad B+ cap. Look for 100mfd 200v up to 470mfd 250v. The set should regulate at no higher than 135v. 140v trips the x-ray protection.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us