More Samsung DLP Problem(s)

 

New member
Username: Pcomrie

Post Number: 1
Registered: Sep-07
Having a strange problem with my Samsung HLP5063 set. Had the 3 blinking light syndrome so changed the bulb but it had no effect. Set would try to power up (fire-up the lamp) and you could hear it power cycle 3 times before auto shutting down and going into the 3 blinking light phase. With repeated tries i can get the set/picture to come on (sometimes) and it tends to play DVDs just fine but with regular TV (cable), after a while, the picture starts to break-up or freezes and sometime goes blank - along with this behavior the controls also lock-up (remote as well as buttons on the set) and only way to turn the set off is to pull the plug. Set is a couple years old but with very few hours (less than 600 hrs) and out of warrantee. I have been working with a local tech (Samsung authorized service) and he recommends replacing the DMD board. Can anyone confirm that above symptom(s) is indicative/most likely associated with an DMD failure?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us