Samsung BP96-00224J....help!!!
|
New member Username: AseemPost Number: 1 Registered: Aug-07 | I have Samsung BP96-00224J. The picture is not going to work because when the picture first appears, it is dimmer than usual, then after 15 seconds, it disapears and the 3 lights start blinking. The screen starts to flicker and the picture get off...........!! Please tell me what to do? Help please! |
|
New member Username: DonalldPost Number: 7 Registered: Aug-07 | It sounds like you need a new lamp. When the lights are blinking in the front and the picture is getting dim, that's usually a sign the lamp is dying. The lamps on most DLP's/LCD's are heavily dependent on elevation, tempature, and type of viewing on your television. Call 1-800-Samsung if you would like to speak with a Samsung service professional before replacing the lamp. The call is free. |
|
New member Username: ImaanPost Number: 10 Registered: Aug-07 | Yea I am agreed to donalld. why don't you check the manual? Try reseat the lamp and see the condition if still the same then must go for a new Lamp. Good Luck! |
|
New member Username: SarawyniPost Number: 3 Registered: Aug-07 | It could be ballast or lamp problem. Have you reseated the Lamp? Clean the air filters. and try reaseating it. lets see wt happens? |
|
Bronze Member Username: OvadoggvoPost Number: 49 Registered: May-07 | If you change out the lamp and your TV is still dim, it's going to be the DMD board I've seen this on a number of older TV, especially sets that original came with the BP96-00224C. Hopefully it's just the lamp, good luck! |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics