Bell 82/91

 

New member
Username: Tariqic

Post Number: 4
Registered: May-06
Is it possible to receive both 82 and 91 satellites or do I need to get a separate dish for each? If I am able to receive both, could you please tell me how I am able to do that. I am able to find both satellites but the receiver only locks onto 1. Thanx
 

Bronze Member
Username: Woofy

Ontario Canada

Post Number: 98
Registered: Feb-06
you need to have 2 lnb's for 2 satellites..do you have 2?
 

New member
Username: Tariqic

Post Number: 5
Registered: May-06
it's a twin lnb with one coaxal coming out.
 

Bronze Member
Username: Woofy

Ontario Canada

Post Number: 100
Registered: Feb-06
then you should be able to hit both birds without much problem..not all that much on 82 though..91 is the main one...have you considered dishnet 110,119 sats..much more and better programs. and if you have a dish 500 with twin lnb dp thats what it was made for.
 

New member
Username: Tariqic

Post Number: 6
Registered: May-06
The 110, 119 was my first preference; however when I was having such a hard time find the birds, I accidentally found 82/91 and settled on them. I would luv to switch to 110/119 if I can just find them, :-)

BTW, how can I hit 82/91 at the sametime? Thanx
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 101
Registered: Feb-06
If you use a dish pointing calulator..it will give you the exact settings to point to. have a look here,add a w for the link to work.

http://ww3.telus.net/rampage/skew.htm

 

New member
Username: Tariqic

Post Number: 7
Registered: May-06
any input on "how can I hit 82/91 at the sametime". I have a C**lsat 5000.
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 103
Registered: Feb-06
just use the same dish and find your look angle and aim. setting should be like so.

FOr DISH 500 - c0olsat 5000 dish settings

119
lnb power - on
lnb type - legacy twin LNB1
lnb freq - 11.250
22 khz - off
disque switch - 1.0
committed - 1
legacy sw - off




110

lnb power - on
lnb type - legacy twin LNB
lnb freq -11.250
22 khz - off
disque switch - 1.0
committed - 2
legacy sw - off


lnb from 119 to disque swtich port 1
lnb from 110 to disque switch port 2
 

New member
Username: Tariqic

Post Number: 8
Registered: May-06
I only have one coaxal coming out of the dish. Should I use a Y-splitter for that 1 coaxal coming from the dish and take the output from the splitter and put 1 end for Switch Port 1 and the other to Switch Port 2? Thanx
 

Silver Member
Username: Woofy

Ontario Canada

Post Number: 105
Registered: Feb-06
No your twin lnb has a built in switch..all you need is one rg6 cable from your lnb(left side as you face towards the dish) to your receiver..and adjust your settings in installation menu.
 

New member
Username: Dellworkshop

Post Number: 4
Registered: May-06
Problem with echostar 110 is reading 119, but 119 is seeing 119...110 was seeing the right bird, but it got switched automatically to 119..pls help...so is 61.5...looking at 119 ???
any suggestions.
 

New member
Username: Tariqic

Post Number: 9
Registered: May-06
Thank you so much Rob. I will try the settings you suggested today. Have a great day.
 

New member
Username: R1010

Canada

Post Number: 3
Registered: May-06
ok guys i have this site also may some one get help form there is bell key also there


http://www.dss-newbies.net/forums/index.php
 

New member
Username: R1010

Canada

Post Number: 4
Registered: May-06
BELL EXPRESSVU
AUX0 FF 02 A1 63 A2 22 41 75
AUX1 45 43 27 E4 BB 1C 5F 9D
04/18/2006

BELL EXPRESSVU IDEA
9E93210F56A8366889BFA96A49AA5EBB
FF02A163A2224175454327E4BB1C5F9D Active

 

Bronze Member
Username: 111283

Ottawa, Ontario Canada

Post Number: 27
Registered: Sep-05
Isn't 82 strictly hi-def ???
 

New member
Username: Jenns7

Post Number: 1
Registered: May-06
does this work for bev that is down, as i have absolutely no channels coming in
 

New member
Username: Kohat

Post Number: 4
Registered: May-06
Hi, Anyone has new keys for FORTEC

Thanks
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 426
Registered: May-06
James READ all this thread
 

New member
Username: Milla

Edmonton, Alberta Canada

Post Number: 7
Registered: May-06
r1010 i tried that key and its no good buddy its an old key from meastra. i think
 

New member
Username: Milla

Edmonton, Alberta Canada

Post Number: 8
Registered: May-06
r1010 that key is an old from meastra and its useless now. i lost all my ppv also. u gonna have to wait.........
 

New member
Username: Ssparkle0316

Post Number: 1
Registered: May-06
Does anybody have the sat nimiq working? my went down when they updated codes. thanks
 

New member
Username: Ssparkle0316

Post Number: 2
Registered: May-06
Need help please, my nimiq is down can anybody help me get those channels back
 

Bronze Member
Username: Nick32058

Asdfvafdsv, QC Sdv

Post Number: 20
Registered: Mar-06
Can someone please explain,how to enter new keys
for BEV and what is the provider ID for BEV
Thanks.Pansat 2500a.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us