Samsung dlp restoring factory settings

 

New member
Username: Nctinter

Post Number: 1
Registered: Apr-06
I have a Samsung hl-p5067 and the CCA settings have been changed. I had a listing of all the factory settings in the service menu but ( I swear this happened) my dogs ate it. Anyone out there have a listing of these factory settings. CCA and COEFFs? thanks
 

Silver Member
Username: Fyi

Dallas, Texas

Post Number: 640
Registered: May-05
It's dfferent for each light engine. When a light engine is shipped to a tech to replace a bad one the box includes a data sheet with values specific to that engine.

Here is a snapshot of one before tinkering, but use it for comparison or ballpark.

Upload
 

New member
Username: Nctinter

Post Number: 2
Registered: Apr-06
thanks alot that helped alot. You wouldnt happen to have the DNIe settings also? Im not sure if they were messed with, but the numbers look funky. Thanks again, I've searched everywhere for this info!
 

Silver Member
Username: Fyi

Dallas, Texas

Post Number: 645
Registered: May-05
DNIE creates a lot of bad edge enhancements.
I turned all five or six DNIE values to -0-.
It sure cleaned up some squiggly outlines in standard def. Dropping your sharpness to 20 is a big help too.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us