|
Bronze Member Username: 1lakerfanPost Number: 38 Registered: Apr-06 | I have the RTi10 front speakers and they have four terminals on the back. Someone me that one set is for pitch and one set is for bass. Which set is for the bass (two terminals on the top or the terminals on the bottom). |
|
Platinum Member Username: Project6Post Number: 11088 Registered: Dec-03 | Read up https://www.ecoustics.com/electronics/products/articles/109419.html |
|
Bronze Member Username: 1lakerfanPost Number: 39 Registered: Apr-06 | I'm not bi-wiring or bi-amping I'm just connecting the speaker to the recivers. Does it matter where I connect the speaker wire on the speakers. |
|
Bronze Member Username: 1lakerfanPost Number: 40 Registered: Apr-06 | reciever |
|
Platinum Member Username: Project6Post Number: 11089 Registered: Dec-03 | As long as they are all connected to the source. |
|
Gold Member Username: John_sColumbus, Ohio US Post Number: 1104 Registered: Feb-04 | Albert, As long as the removable connector bars that link the two sets of terminals are still in place, you can connect your speaker wire to either top or bottom sets, it doesn't matter. |
|
Silver Member Username: PraetorianCanada Post Number: 438 Registered: Dec-05 | Although I recommend replacing the bridge with the wire you are using, i.e. run it the same wire through both sets of terminals instead of a bridge. |