|
New member Username: GeeniusPortsmouthUK Post Number: 1 Registered: Aug-04 | I own an Onkyo A9211 (for spec of the amp see the link at the bottom of the post), i am currently using Eltax Liberty 5's (120 Watt) when i wack it up over about half way the speakers start to bottom out. what should i buy. i want to be able to max out my amp and have no distortion? any ideas? all help will be MUCH appreciated. Cheers, feel free to e-mail me. http://www.onkyo.net/uk/cms/products/hifi/hifi_amp/1300-A9211/indspeci.htm |
|
Gold Member Username: KeggerMICHIGAN Post Number: 1379 Registered: Dec-03 | well what i would look for is high effecincy speakers with larger drivers and good power handling. maybe some 10 or 12" drivers with 90db or higher sens. now this is just my oppinnion and others may differ. |
|
New member Username: GeeniusPortsmouthUK Post Number: 5 Registered: Aug-04 | any specific recommendations?? |
|
Gold Member Username: KeggerMICHIGAN Post Number: 1385 Registered: Dec-03 | well i've been into building my own speakers over the past few years, so i'm not sure whats out their any more. if your interested in building something or to just get an idea of the kinda speaker i'm talking about try this. http://www.flippedbit.net/speaker/3waydesign.htm |
|
Gold Member Username: KeggerMICHIGAN Post Number: 1386 Registered: Dec-03 | now that would be a fairly inexpensive diy speaker that isn't the most power handling in the world but would probably be more than enough. there are many more out their. hear's another link. this one runs dual 10's http://www.partsexpress.com/projectshowcase/veritas.htm |