Totoem Sttaf's on marble tile

 

Bronze Member
Username: Smwick

B.C Canada

Post Number: 15
Registered: Dec-07
I'm experimenting with the Totems sitting on 1/2" marble tiles in a carpeted room. I removed the spikes from the base of the speakers and put tiny rubber bumpers in place of the spikes. Aside from looking more exotic, I think they sound a little better. Base seems a little tighter and the over all sound is cleaner. Am I just imagining this or does this reduce vibrations and help clean up the audio. I also have them mass loaded, but that was done earlier. Any thoughts on this?
 

Gold Member
Username: Artk

Albany, Oregon USA

Post Number: 5915
Registered: Feb-05
Enjoy!
 

Platinum Member
Username: Jan_b_vigne

Dallas, TX

Post Number: 12024
Registered: May-04
.

"Base seems a little tighter and the over all sound is cleaner."



Hey! Sounds like you've made it to second base.
 

Bronze Member
Username: Smwick

B.C Canada

Post Number: 16
Registered: Dec-07
"Hey! Sounds like you've made it to second base."


lol, Jan thats pretty good on the spelling error.
 

Gold Member
Username: Mike3

Wylie, Tx USA

Post Number: 1018
Registered: May-06
Steve,

Anything you change, anything, can have an impact on your sound. Sometimes it seems better, sometimes it seems worse, sometimes it seems..........

changed.

Lots of ways to tweak and experiment. That is one of the joys of this passion of ours.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us