Subwoofer pre out problem

 

Gold Member
Username: Livin_loud

F uck fuckid... Fi Audio

Post Number: 1665
Registered: Jan-06
So this would be my first venture into the home audio section lol, so sorry if this is the wrong place to be asking this.

i have an str-de897 and use the sub pre out line which is connected to a klh s120eth amp. basically my problem is that in order for the amp to turn on, i must turn the volume up to a certain point on the receiver, which causes a real annoyance when i don't want it that loud. now is this my receiver not sending a hot enough signal? or could it be the amp not picking it up at low volumes?

also, i can turn it up so the amp comes on, then turn it down and get the level i want, but it turns off eventually, leaving me back at square one. thanks in advance
 

Gold Member
Username: Kano

BC Canada

Post Number: 1180
Registered: Oct-04
Should be a switch on the amp for on/off/auto. Change it from auto to on.
 

Gold Member
Username: Livin_loud

F uck fuckid... Fi Audio

Post Number: 1693
Registered: Jan-06
that did the trick. kinda lame i didn't think of that on my own... weird thing is when its in 2ch its fine, but anything else and that happens.

thanks for the help!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us