New setup - need connect subwoofer advice.

 

Bronze Member
Username: Radio1_mike

Post Number: 15
Registered: Apr-06
Hi.

I have a Klipsch ProMedia 2.1 setup and a new stereo setup (just shipped to me). I'd like to use the sub from the 2.1s with my receiver (HK AVR-135).

The sub is powered. But its only input in a DIN plug that comes from a control box (detachable- on left speaker) that controls speaker power on and sub level. The sub has its own power rocker switch. That DIN plug also receives stereo from 1/8" plug (sound card output) and you hook the speaker up through pin connectors on the sub itself.

Does it sound okay to take that stereo input and use an RCA plug converter to then hook to sub out from receiver (RCA-type)?
 

Gold Member
Username: Edster922

Abubala, Ababala The Occupation

Post Number: 3935
Registered: Mar-05

I'd think that if you have the HK's crossover turned on, it should be ok.

only one way to find out for sure...
 

Gold Member
Username: Project6

Post Number: 7837
Registered: Dec-03
Chief, get a proper sub. Don't bother rigging those subs. And no, they will not sound okay at all.
 

Gold Member
Username: Gavincumm

New York USA

Post Number: 1075
Registered: Feb-05
they are crossed over too high.
 

New member
Username: Edge2305

Houston, Tx Us

Post Number: 2
Registered: May-06
HEED HELP ON CONNECTING MY SUBWOOFER ITS A Bazooka BT8024DVC IT HAS TWO SETS OF TERMINALS(2POSITIVE 2 NEGATIVE) AND I HAVE A 4 CHANNEL AMP HOW DO I HOOK THE AMP TO THE SUB
 

Gold Member
Username: Project6

Post Number: 7869
Registered: Dec-03
Carlos, start your own thread! This is not the CAR AUDIO FORUM, this is Home Audio!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us