New member Username: NrclptcnsmniakPost Number: 1 Registered: Aug-04 | im wondering what the best way to wire my 1400 watt 2 channel amp: 250x2 rms watt @4//700x2 max watts@2//1400x1 bridged @4:::::: to my 2 subs: sony XS-L121P5. if anyone cud either explain or draw a picture in paint or something i would really appreciate it. |
New member Username: NrclptcnsmniakPost Number: 2 Registered: Aug-04 | the amp is bridgable |
New member Username: NrclptcnsmniakPost Number: 3 Registered: Aug-04 | i think they are single coil and the max rms is 350 |
New member Username: NrclptcnsmniakPost Number: 4 Registered: Aug-04 | the subs are 4 ohms |
Silver Member Username: Davids2004Houston, TX USA Post Number: 595 Registered: Jun-04 | Wire each sub to its own channel. |
New member Username: Audiobahn_manFreakmont, MI Post Number: 7 Registered: Aug-04 | yea, go here i think this is what ya need if you amp is 2 ch, wire each sub to each chanel like this http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=1+woofer&WoofImp= Single+Voice+Coil+-+4+ohms&image.x=22&image.y=13 |
New member Username: NrclptcnsmniakPost Number: 5 Registered: Aug-04 | if i do that then wont my speakers be underpowered since they run at 350 rms and the amp only puts out 250 on each channel at 4 ohms? |