|
Bronze Member Username: DavenPost Number: 15 Registered: Jun-04 | Im about to get a adire tempest 15", its going to be in a sealed enclosure, its going to be mounted over the tire well. My question is, what amp should I use to push it? I have about a 200$ range, and the amp needs to have high imput. Thanks, Daven |
|
Bronze Member Username: DavenPost Number: 16 Registered: Jun-04 | bump |
|
Silver Member Username: Davids2004Houston, TX USA Post Number: 478 Registered: Jun-04 | What is the rms wattage on that sub and are they dvc or svc. 2-4-6 ohm and then I can help ya. |
|
Bronze Member Username: DavenPost Number: 17 Registered: Jun-04 | dvc 750W total, and im guessing 6 ohm, but im not too sure. http://www.adireaudio.com/ theres the sight if anyone wants to confirm this. |
|
Bronze Member Username: DavenPost Number: 18 Registered: Jun-04 | by looking at this though, i think its 4ohm http://www.adireaudio.com/Files/TempestWhitePaper.pdf |
|
Silver Member Username: JayjLouisiana USA Post Number: 407 Registered: May-04 | If it is a 4 ohm DVC sub you can try a JBL600.1. Wire the sub down to 2 ohms. |
|
Bronze Member Username: Koz1031Monticello, In United states Post Number: 18 Registered: Jul-04 | I believe its an 8 ohm you can get it in 4 ohm for a meer $300.0you might want to read earlier posts, seems the shiva and brahma are better choices in the adire audio line. |