-Help- Box for 2 Pioneer TS-W3004SPL subwoofers

 

New member
Username: Alvy84vts

Post Number: 1
Registered: Sep-16
Hi all,

I would build a box for a couple of Pioneer TS-W3004SPL Subwoofer. They are 1000 rms each and I can give them more then 2000 rms total with my Soundstream Picasso PA1.6000D (rated 3000 rms at 1 Ohm)
I prefer a big box with low frequency because this subwoofers go down very good and I hope (my car is an Audi TT and inside it is very small) to obtain little hairtrick (the box will be placed with subwoofer and reflex port pushing into the cabin and not in the trunk)

I can build a box with this dimensions:

External Height = 35cm (13,78 in)
External Width = 88cm (34,65 in)
External Upper Depth = 35cm (13,78 in)
External Lower Depth = 55cm (21,65 in)

MDF 19mm ( 3/4 inch )

For a totale volume of 109,72 Liters (3,87 cubic feet)

In the link you can see subwoofer data:
http://www.manualscat.com/viewer/48430/bg2.png

Can you help me and tell me if this box is ok for this subwoofer and what kind of port can I build to have powerful low frequencies? I can use aeroport (16 or 20 cm - 6 or 8 inches) or build a square port but I need help with the correct dimensions and depth.

Thank you very much from Italy and sorry for my not perfect english!
« Previous Thread Next Thread »

Add Your Message Here

Bold text Italics Create a hyperlink Insert a clipart image Add a YouTube Video
Need to Register?
Forgot Password?
Enable HTML code in message
   



Main Forums

Today's Posts

Forum Help

Follow Us