ND-BC1 Rear view camera help...

 

Bronze Member
Username: Gdogg21

Forest Grove, Oregon U.S.A.

Post Number: 29
Registered: Oct-07
I bought an ND-BC1 Rear view camera to use with my Pioneer HU. The only issue is the wires leading from the camera to the black(switchbox?) or power supply unit were cut off at the plastic piece that plugs into the (switchbox) or power supply unit. The wires that were installed in the power supply unit (for whatever reason) were pulled from the white plastic piece so I have no idea which wires go where in the white plastic piece. There are 4 wires leading from the camera; black, white, red and yellow. There are also 4 spots on the plastic piece so any help with which wires goes where would be greatly appreciated. Thanks,

--Royce
 

Bronze Member
Username: Gdogg21

Forest Grove, Oregon U.S.A.

Post Number: 30
Registered: Oct-07
Anybody got any idea on this thing? I just talked with 2 different Pioneer representatives from 2 different departments that both recommended I buy a new camera. The reason being that the camera and the plug at the end of the camera both are technically "non serviceable" parts. So they cannot advise as to which wire lead plugs into which spot on the power supply unit.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us