1200rms amp
|
Silver Member Username: Holt_champHtown, MI Post Number: 987 Registered: Oct-06 | i need an amp that will give me a solid 1200rms. i only have about 300 dollars to spend. any suggestions? |
|
Silver Member Username: Holt_champHtown, MI Post Number: 988 Registered: Oct-06 | someone mentioned a AQ1200 @ 1 ohm? how would i wire my subs to that. would i need 2 or 4 ohm subs? |
|
Silver Member Username: Holt_champHtown, MI Post Number: 989 Registered: Oct-06 | ok nvm im an idiot. i found it out |
|
Gold Member Username: N2audioLawrence, Ks USA Post Number: 1734 Registered: Mar-04 | solid amp. $250's a lot of amp for the money. With a pair of dvc 4's it will give you 1200-1400w. |
|
Gold Member Username: SomedonniedudeIllinois Braaap MX Post Number: 2478 Registered: May-07 | I have an AQ1200D, have no complaints so far. It will do 1200w, but don't expect anymore than that. IIRC, DJ said they will do around 1250w (aka they are very accurately rated) What subs are you wanting to run? |
|
Gold Member Username: SomedonniedudeIllinois Braaap MX Post Number: 2480 Registered: May-07 | https://www.ecoustics.com/electronics/forum/car-audio/560602.html |
|
Silver Member Username: Holt_champHtown, MI Post Number: 991 Registered: Oct-06 | they will be 2 15" RE SE 4 ohm subs |
|
New member Username: Hdc3believerDalton, GA US Post Number: 4 Registered: Dec-08 | GO WITH THE AQ best bang for the buck by far! |
|
Silver Member Username: Holt_champHtown, MI Post Number: 993 Registered: Oct-06 | yeah thats what i will be getting...what size wire should i use? can it fit 0 gauge wire? |
|
Silver Member Username: Holt_champHtown, MI Post Number: 994 Registered: Oct-06 | i was just looking at the aq1200 and i was wondering is it a 2 channel amp? it has two sets of speaker inputs? |
|
Gold Member Username: N2audioLawrence, Ks USA Post Number: 1735 Registered: Mar-04 | you mean outputs? a lot of big monos have that. It's just two places to connect wires to the SINGLE channel. http://ampguts.realmofexcursion.com/American_Bass_VFL_400.1/outside3.jpg http://ampguts.realmofexcursion.com/Atomic_AT-1500.1D/outside2.jpg http://ampguts.realmofexcursion.com/Autotek_MM4000.1D/outside3.jpg http://ampguts.realmofexcursion.com/Concept_CC-D1200/outside2.jpg |
|
Silver Member Username: Holt_champHtown, MI Post Number: 995 Registered: Oct-06 | yes outputs i mean lol. so would i just use one set then? and leave the other with nothing attached? |
|
Silver Member Username: Holt_champHtown, MI Post Number: 996 Registered: Oct-06 | and what size power wire would fit in the aq1200? |
|
Gold Member Username: Snowball123West Allis, WI Post Number: 2528 Registered: Oct-07 | http://www.audioque.com/aq/AQamps.htm it looks like 4 gauge to me. |
|
Gold Member Username: SomedonniedudeIllinois Braaap MX Post Number: 2483 Registered: May-07 | 4ga is correct. |
|
Gold Member Username: N2audioLawrence, Ks USA Post Number: 1737 Registered: Mar-04 | "so would i just use one set then? and leave the other with nothing attached?" Yes, that's fine - what you're looking at is basically this:  |
|
New member Username: MrrichardPost Number: 4 Registered: Apr-09 | Orion 1200d, I'm selling mine $275 solid 1200Wrms @1ohm |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics