Wiring

 

Bronze Member
Username: Kissdaredevil

Post Number: 64
Registered: Aug-06
I have 2 4 ohm dvc subs and a 2 channel amp that is 2 ohm stable. When wiring them is each channel bridged at 2 ohm?
 

Silver Member
Username: Armykyle1

Ms Us

Post Number: 328
Registered: Dec-08
you cant wire DVC4s to 2ohm its either 1 or 4, you can wire each sub to 2ohm and not bridge the amp, just wire a sub to each channel. i would say get a mono block thats 1omh stable or get diff subs
 

New member
Username: Twitch199

Post Number: 1
Registered: Feb-09
okay. im gonna explain this the best i can. my head unit is a Dual XDM7610 or XDMR7710 i dont remember. i have 2 sony explod 12's powered by a 580 watt DUAL amp in my truck. but i have a kenwood 10 and a Blaupunkt 600 watt amp and i want it also in there but idk how i would power the 2 amps.

right now i have:

HU----DUAL AMP----sony explodes

but i want:

/-------DUAL AMP-----sony explods
HU
\------blaupunkt amp-----kenwood

is that possible? or would it have to be

HU-dual amp-----sony explod
.........\
blaupunkt amp----kenwood


help please??
 

Bronze Member
Username: Vivi2000

Owosso, Mi

Post Number: 96
Registered: Aug-07
If you want to run both amps for subs one might have RCA outputs on it. Just go HU to amp to amp. Although mixing differnt subs is not reccomended.
 

Bronze Member
Username: Kissdaredevil

Post Number: 65
Registered: Aug-06
how is it that you can get each channel on a 2 channel amp to 2 ohm but you can't bridge the whole channel to 2 ohms. When you do each channel to 2 ohm does that make the amp at 4 ohms?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us