Ring terminals

 

New member
Username: Tuloud

Post Number: 4
Registered: May-07
what kind of ring terminals should I use under the hood,crimp,solder or screw on. What works best, I'm using 4ga wire
 

Silver Member
Username: Waresgaragestereo

Fort Valley, GA

Post Number: 417
Registered: Mar-08
i use those copper ones personal pref. if the wires are already on the car i use vice grips to crimp them but if i custom make a wire i use the crimper i got at NAPA. i use 1/0 that my opinion
 

New member
Username: Tuloud

Post Number: 5
Registered: May-07
crimp will work ok huh. Im just hookin up a 500/1 thats why I only need the 4 ga wire for now I have heard that crimp isnt the best under the hood though well thanks alot Ware's
 

Silver Member
Username: Waresgaragestereo

Fort Valley, GA

Post Number: 418
Registered: Mar-08
ive never had problems with them.
 

Silver Member
Username: Waresgaragestereo

Fort Valley, GA

Post Number: 455
Registered: Mar-08
i have those ring terminals for sale if u need some
 

Gold Member
Username: Nd4spd18

Philadelphia, PA

Post Number: 9184
Registered: Jul-06
AS long as you do a GOOD crimp, thats all you need

Although it can't hurt to solder them also.
 

Silver Member
Username: Waresgaragestereo

Fort Valley, GA

Post Number: 456
Registered: Mar-08
yup. thats why i have a crimper tool that you hit with a hammer to do my crimping
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us